Canon VIXIA HF S21 VIXIA HF S20 / HF S21 / HF S200 Instruction Manual - Page 65
Dynamic], Standard]
View all Canon VIXIA HF S21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Options ( Default value in mode) [P Dynamic] ( mode only) Compensates for a higher degree of camcorder shake, such as when shooting while walk- ing, and is more effective as the zoom approaches full wide angle. [Q Standard], [Q On] Compensates for a lower degree of camcorder shake, such as when shooting while remaining stationary, and is suitable for shooting natural-looking scenes. Use this setting when recording movies with the optional Wide-converter or Tele-converter. [j Off] Use this setting when the camcorder is mounted on a tripod. Powered IS When shooting video, you can use Powered IS to make the image stabilization even more powerful. Powered IS is most effective when you are stationary and zooming in on far subjects using high zoom ratios (the more you approach the telephoto end). Holding the LCD panel with your left hand will add to the stability of the shot. Press and hold Y as long as you want to activate Powered IS. • Z appears in yellow, while Powered IS is activated. • You can change the operation of the Y button (long press or toggle on/off) with the 7 8 [POWERED IS Button] setting. NOTES • If the degree of camcorder shake is too high, the image stabilizer may not be able to fully compensate. • Powered IS is not available in mode. • For surveying and following shots, when you pan the camcorder from side to side or tilt it up and down, we recommend setting the IS mode to [P Dynamic] or [Q Standard]. Video 65