Canon Vb-C60 NETWORK CAMERA VB-C60 Start Guide - Page 49
Use of External Power Supply, This completes the network connection.
![]() |
UPC - 013803118063
View all Canon Vb-C60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Step 2 Connect the Camera to the Network Use of External Power Supply An AC adapter, 12-VDC input or 24-VAC input can be used as an external power supply. Connect the supplied power connector ( P. viii) as shown in the figure below. Screwdriver Tightening torque: 0.2 N·m (1.77lbf·in) (max.) Stripping length approx. 4mm - 6mm (0.16inch - 0.24inch) Power Connector (Supplied) Initial Setting and Installation of Camera Use a 12-VDC or 24-VAC power supply insulated from 100 VAC. 12 VDC can be connected in a non-polar condition. Use the power supply within the following voltage range. 24 VAC: Voltage fluctuation 24 VAC ± 10% or less (50 or 60 Hz ± 0.5 Hz or less) Current supply capacity per camera 1.0 A or more 12 VDC: Voltage fluctuation 12 VDC ± 10% or less Current supply capacity per camera 1.5 A or more * If a 12-VDC battery power supply is used, be sure to connect a resistor of 0.5 to 1.0 Ω/20 W or more to the power line. * Use double-insulated devices for the external power supply. Recommended Power Cable of VB-C60 [Reference] Cable (AWG) conductor size (Φmm, Φinch) #24 (0.52 mm) (0.020inch) #22 (0.65 mm) (0.026inch) #20 (0.82 mm) (0.032inch) #18 (1.03 mm) (0.041inch) #16 (1.30 mm) (0.051inch) Maximum cable length, 12 VDC (m, ft) 5 (16.4) 9 (29.5) 14 (45.9) 23 (75.4) 32 (105.0) Maximum cable length, 24 VAC (m, ft) 11 (36.1) 18 (59.0) 29 (95.1) 46 (151.0) 64 (210.0) Use a UL cable (UL-1015 or equivalent) for wiring 12 VDC or 24 VAC. This completes the network connection. 2-9
![](/manual_guide/products/canon-vbc60-network-camera-vbc60-start-guide-b7ec214/49.png)