Canon Vb-C60 NETWORK CAMERA VB-C60 Start Guide - Page 56
Installing in the upright position, Installing on a Flat Surface, Using a Tripod
UPC - 013803118063
View all Canon Vb-C60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Step 4 Install the Camera Installing in the upright position Note For this camera, the image position is set by assuming on-the ceiling installation. To reverse the video upside down, change the direction under "Mounting Method" in the "Camera" setting group on the Setting Page. See "Installation Conditions" ( Operation Guide). Installing on a Flat Surface Install the rubber feet. Use the camera by placing it on a flat, stable surface. Using a Tripod Screw holes are provided at the bottom of the camera for installing a tripod. 30 mm (1.18 inch) or wider 5.5 mm (0.22 inch) or shorter Tripod mounting screw Note Be sure to use a tripod whose mounting screws are shorter than 5.5 mm. If a tripod whose mounting screws are 5.5 mm or longer is used, the camera may be damaged. Also, use a tripod base with a diameter of 30 mm or more. 2-16