Canon Vb-C60 VB-C60 Operation Guide - Page 55
SA AH Authentication Algorithm, SA AH Authentication Key outbound, SA AH SPI outbound, SA AH
![]() |
UPC - 013803118063
View all Canon Vb-C60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Detailed Settings Set IPsec (IPsec) !6 !7 !8 !9 @0 !6 SA AH Authentication Algorithm Select the AH authentication algorithm from "HMAC_SHA1_96" and "HMAC_MD5_96" according to the authentication algorithm supported by the destination device. !7 SA AH Authentication Key (outbound) Set the SA authentication key for outbound. Set a hexadecimal value that corresponds to 160bit if "HMAC_SHA1_96" is selected in 8 or 128bit if "HMAC_MD5_96". !8 SA AH SPI (outbound) Set the SA SPI value for outbound. Set it in the range of 256 - 4294967295. !9 SA AH Authentication Key (inbound) Set the SA authentication key for inbound. Set a hexadecimal value that corresponds to 160bit if "HMAC_SHA1_96" is selected in 8 or 128bit if "HMAC_MD5_96". @0 SA AH SPI (inbound) Set the SA SPI value for inbound. Set it in the range of 256 - 4294967295. Since the setting value is used as an ID number to identify SA, do not specify the same value as the SPI of another AH. ● In order to operate VB-C60 using IPsec, you need to set communication destinations Note and the network in advance. For more information on these settings, contact your system administrator. ● If you change the setting of "IPSec", the currently-used browser may become unable to access the camera. Be sure to read the note in the "Setting Items That Require a Reboot" page (➞ P.1-43), in advance. 1-41
![](/manual_guide/products/canon-vbc60-vbc60-operation-guide-2f8b2a2/55.png)