Canon iPF605 iPF605 User Manual - Page 537
Colors in printed images are uneven, Far Ed Feed
UPC - 013803096415
View all Canon iPF605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 537 highlights
Problems with the printing quality Colors in printed images are uneven Cause Corrective Action Line Drawing/Text is selected when printing images Specify Image in the printer driver. in many solid colors. You are printing on paper that curls easily. Printed colors may appear uneven on the leading edge of paper that is susceptible to curling. Increase the level of vacuum holding the paper against the Platen or specify a margin of 20 mm (0.79 in) or more for the leading edge. (→P.468) If you use Glossy Paper, art paper or Coated Paper, In Advanced Settings of the printer driver, choose color shading may appear at the rear edges of the Highest or High in Print Quality. paper. (→P.193) Printed colors may be uneven if you set the Print Quality too low. Choose a higher level of Print Quality in the Advanced Settings of the printer driver. (→P.193) Color may be uneven between dark and light image Select Unidirectional Printing in the Advanced areas. Settings of the printer driver. When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at the edges. Specify No in Auto Cut in the printer driver before printing. In this case, the paper can be printed without borders on the left and right sides only. Cut the printed document ejected from the printer, then use scissors to cut away the edges on the top and bottom. Choose a higher level of Print Quality in the Advanced Settings of the printer driver. (→P.193) The Printhead is out of alignment. Adjust the Printhead alignment. (→P.453) Drying documents stacked on each other may cause To avoid uneven colors, we recommend drying each uneven colors. sheet separately. If you are using heavyweight sheets or similar paper, For heavyweight sheets or similar paper, execute Adj colors may be uneven on the trailing edge in some Far Ed Feed with the Front Tray Guides raised. Also cases even after you execute Adj Far Ed Feed. keep the Front Tray Guides raised during printing. Before printing on paper other than heavyweight sheets, lower the Front Tray Guides. Troubleshooting 523