Canon iPF605 iPF605 User Manual - Page 555

Messages regarding paper Roll printing is selected, but sheets are loaded. Cause A print job for rolls was received when a sheet is loaded. Corrective Action Press the OK button and remove the sheet. (→P.150) Load a roll and try printing again. (→P.115) Hold down the Stop button for a second or more to cancel printing. The roll is empty. The roll is empty. Cause Corrective Action Follow these steps below to replace the used roll with a new roll of the same type and size. 1.Remove the roll. (→P.117) (→P.118) (→P.119) 2.Load the new roll. (→P.112) (→P.114) (→P.115) 3.If no barcode was printed on the roll, specify the type of paper. (→P.110) 4.If no barcode was printed on the roll, specify the paper length. (→P.111) Roll feed unit err Cause The Roll Feed Unit is not working. Corrective Action Turn off the printer, remove the Roll Feed Unit momentarily, and then reinstall it. (→P.139) (→P.140) If the message is still displayed after you do this, contact your Canon dealer for assistance. No Roll Feed Unit. Cause The printer has received a print job that species rolls, but the Roll Feed Unit is not installed. Corrective Action Install the Roll Feed Unit and resend the print job. (→P.140) Error Message 541