Canon iPF710 iPF710 User Manual - Page 66

Control Panel GL2 Settings Setting Item GL2 Replot GL2 BufferClear Color Mode Print Quality Input Resolution Media Source Conserve Paper Line Cap Monochrome Color (CAD) 1 Color (CAD) 2 Description, Instructions Print the last printed job (still stored in the printer memory) again. Delete the last job printed using HP-GL/2, still stored in the printer memory. Print in monochrome. Print in standard colors. Print in brighter colors. Choose the print quality. Choose the printer input resolution, 600dpi or 300dpi. Choose the media source for HP-GL/2 printing. Conserves paper when printing. Choose the shape of the end point, determined by Software or Rounded. • If you choose Software Operation is determined by the application. If nothing is specied by the application, the result is as shown in the gure. • If you choose Rounded Smoothing Choose whether to print arcs as smooth curved lines or as multiple connected line segments. • If you choose Software Operation is determined by the application. If nothing is specied by the application, the result is as shown in the gure. Note: By default, this is a 72-sided gure • If you choose Smooth Line Width 52 Printer Parts Choose the width for printing lines if no width is specied in the data. Dots in the line width are 300 dpi each.