Canon imageCLASS D760 imageCLASS D700 Series Set-up Instructions - Page 3
Install Cartridge, Load Paper / Attach Output Tray - toner
View all Canon imageCLASS D760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
2 INSTALL CARTRIDGE A Remove the cartridge from its bag. B Rock the cartridge 5 or 6 times to distribute the toner evenly. C Place the cartridge on a flat and stable surface, grip the sealing tape tab and snap in the direction shown. Make sure that the tab is detached from the cartridge. D Grasp the cartridge with one hand, firmly and slowly pull out the sealing tape tab with the other hand. E Remove the sealing tape completely. F Position the arrow mark on the cartridge towards the inside of the machine, and gently slide the cartridge into the machine as far as it will go. Close the cartridge cover and slide the platen unit back to the original position. 3 LOAD PAPER / ATTACH OUTPUT TRAY A Grip the cassette handle, and pull it out towards you until the cassette comes to a stop. C B Load the paper stack beneath the cassette's length guide (1) and width guide's claws (2). Make sure that the paper stack does not exceed the length and width guide's claws in the cassette. Failure to do so will cause a paper jam. Gently insert the cassette as far as it will go. Hook the tab on the output tray onto the opening on the left side of the machine.