Canon imageCLASS D760 imageCLASS D700 Series Set-up Instructions - Page 5

Set Fax Receive Mode

Page 5 highlights

5 SET FAX RECEIVE MODE (D780) A Press FAX to switch the machine to Fax Mode. B Press RECEIVE MODE until the mode you want appears: ex. RECEIVE MODE Manual C You can select from the following modes: FAX ONLY: if you use your machine to receive only faxes. DRPD: to distinguish between fax and voice calls by using Distinctive Ring Patterns. MANUAL: you can receive faxes by pressing START before hanging up the handset on the telephone. AnsMode: if you want to receive faxes automatically and route voice calls to an answering machine. FaxTel: when a telephone is connected to the machine, the machine automatically switches between faxes and voice calls. ex. FAX 06/20/2003 17:08 Manual STANDARD D Press SET. The selected receive mode is set and the machine returns to standby mode. The current date and the selected receive mode are displayed. • The machine does not ring when it receives a fax in FaxOnly. If you want to be alerted when a fax is received, connect a telephone to the machine, and enable the INCOMING RING setting. (---> Fax Guide). • For AnsMode, you need to connect an answering machine or a telephone with an answering machine to your machine (see below). • Follow these guidelines when using the machine with an answering machine: - Set the answering machine to answer on the first or second ring. - When recording the outgoing message on the answering machine, the entire message must be no longer than 15 seconds. CONNECTING THE TELEPHONE LINE AND AN EXTERNAL DEVICE (Only for the D780 model) CONNECT EXTERNAL DEVICES AS FOLLOWS: The machine has two jacks on the left side for the following connections: • Telephone or answering machine Telephone line L Machine Telephone or answering machine L : Telephone Line : External device, such as telephone or answering machine. 1. Connect the supplied telephone line to the ofLthJealcink,ethtoenthceontenleecpthtohneeother end of the line jatockthoenteyloepuhr ownaellj.ack on your wall. 2. When you require to send and receive both faxes and voice calls, connect the line from the telephone or answering machine to the Jack. • Telephone and answering machine Telephone line L Machine LINE TEL. Answering machine Telephone • Telephone and modem (external modem) Telephone line L Machine LINE TEL. Modem Telephone Serial Connector Computer • Built-in computer modem and telephone L Machine LINE TEL. Computer Telephone L : Telephone line jack : External device jack

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

: Telephone line jack
: External device jack
Press
FAX
to switch the machine to Fax Mode.
Press
RECEIVE MODE
until the mode you want appears:
You can select from the following modes:
FAX ONLY:
if you use your machine to receive only faxes.
DRPD:
to distinguish between fax and voice calls by using
Distinctive Ring Patterns.
MANUAL:
you can receive faxes by pressing START before
hanging up the handset on the telephone.
AnsMode:
if you want to receive faxes automatically and route
voice calls to an answering machine.
FaxTel:
when a telephone is connected to the machine, the machine automatically switches between faxes and voice calls.
Telephone or answering machine
Telephone and answering machine
Telephone and modem (external modem)
Built-in computer modem and telephone
Press
SET.
The selected receive mode is set and the machine returns to standby mode.
The current date and the selected receive mode are
displayed.
The machine does not ring when it receives a fax in FaxOnly.
If you want to be alerted when a fax is received, connect a telephone
to the machine, and enable the INCOMING RING setting. (---> Fax Guide).
For AnsMode, you need to connect an answering machine or a telephone with an answering machine to your machine (see below).
Follow these guidelines when using the machine with an answering machine:
— Set the answering machine to answer on the first or second ring.
— When recording the outgoing message on the answering machine, the entire message must be no longer than 15 seconds.
ex.
FAX 06/20/2003
17:08
Manual
STANDARD
ex.
RECEIVE MODE
Manual
SET FAX RECEIVE MODE
(D780)
5
L
Machine
Telephone
line
Telephone or
answering machine
L
Machine
Telephone
line
Telephone
Answering
machine
LINE
TEL.
L
Machine
Telephone
line
Telephone
Modem
LINE
TEL.
Computer
Serial
Connector
L
Machine
Telephone
Computer
LINE
TEL.
L
1. Connect the supplied telephone line to the
Jack, then connect the other end of the line
to the telephone jack on your wall.
2. When you require to send and
receive both faxes and voice calls,
connect the line from the telephone
or answering machine to the
Jack.
CONNECTING THE TELEPHONE LINE
AND AN EXTERNAL DEVICE
(Only for the D780 model)
The machine has two jacks on the left side for
the following connections:
: Telephone Line
: External device, such as telephone or answering machine.
CONNECT EXTERNAL
DEVICES AS FOLLOWS:
L
L
A
B
C
D