Canon imageCLASS LBP162dw User Guide - Page 45
Testing the Network Connection
View all Canon imageCLASS LBP162dw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Setting Up ● Select . If you select when these services are unavailable, the machine will waste time and communications resources searching the network for these services. 3 Check that is set to . ● If is selected, change the setting to . 4 Select . ● IP addresses assigned via DHCP override the address obtained via Auto IP. Manually entering an IP address 1 Configure a setting to disable auto-acquisition. ● Select , and set both and to . 2 Select . 3 Specify the IP address, subnet mask, and gateway address (or default gateway). ● Enter these values in each screen, and select . ● On how to enter text, see Entering Text(P. 94) . Checking whether the settings are correct ● Make sure that the Remote UI screen can be displayed with your computer ( Starting Remote UI(P. 178) ). If a computer is not available, you can check the connection by using the operation panel ( Testing the Network Connection(P. 40) ). When you have changed the IP address after installing the printer driver ● When the MFNP port is used, the connection is maintained as long as the machine and the computer belong to the same subnet; therefore, you do not need to add a new port. When the standard TCP/IP port is used, you need to add a new port. Configuring Printer Ports(P. 50) *If you do not know which port is used, see Checking the Printer Port(P. 337) . Testing the Network Connection 1 Select in the Home screen. Home Screen(P. 88) 2 Select . ● If the screen for entering a PIN appears, enter the correct PIN. Setting the System Manager PIN(P. 145) 3 Select . 4 Enter the IPv4 address of another device on the network, and select . ➠ If a proper connection has been established, is displayed. 40