Canon imageCLASS MF113w Getting Started Guide - Page 26
Appendix
View all Canon imageCLASS MF113w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Appendix Important Safety Instructions CAUTION Do not install in the following locations The machine may drop or fall, resulting in injury. • An unstable location • A location exposed to vibrations If the operating noise concerns you Depending on the use environment and operating mode, if the operating noise is of concern, it is recommended that the machine be installed in a place other than the office. This chapter describes important safety instructions for the prevention of injury to users of this machine and others, and damage to property. Read this chapter before using the machine, and follow the instructions to use the machine properly. Do not perform any operations not described in this manual. Canon will not be responsible for any damages resulting from operations not described in this Other cautions • When carrying this machine, follow the instructions in this manual. If carried improperly, it may fall, resulting in injury. • When installing this machine, be careful not to get your hands caught between the machine and the floor or walls. Doing so may result in injury. Power Supply WARNING • Use only a power supply that meets the specified voltage requirements. Failure to do so may result in a fire or electrical shock. • Do not use power cords other than the one provided, as this may result in a fire or electrical shock. manual, improper use, or repair or changes not IMPORTANT • The provided power cord is intended for use performed by Canon or a third party authorized Do not install in the following locations with this machine. Do not connect the power by Canon. Improper operation or use of this Doing so may result in damage to the cord to other devices. machine could result in personal injury and/or machine. • Do not modify, pull, forcibly bend, or perform damage requiring extensive repair that may not • A location subject to temperature and any other act that may damage the power be covered under your Limited Warranty. humidity extremes, whether low or high cord. Do not place heavy objects on the • A location subject to dramatic changes in power cord. Damaging the power cord may temperature or humidity result in a fire or electrical shock. WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To use the machine safely, always pay attention to these warnings. • A location near equipment that generates magnetic or electromagnetic waves • A laboratory or location where chemical reactions occur • A location exposed to corrosive or toxic gases • A location that may warp from the weight of the machine or where the machine is liable to • Do not plug in or unplug the power plug with wet hands, as this may result in an electrical shock. • Do not use extension cords or multi-plug power strips with the machine. Doing so may result in a fire or electrical shock. • Do not wrap the power cord or tie it in a knot, CAUTION Indicates a caution concerning operations that may lead to injury to persons if not performed correctly. To use the machine safely, always pay attention to these cautions. IMPORTANT Indicates operational requirements and restrictions. Be sure to read these items carefully to operate the machine correctly and avoid damage to the machine or property. sink (a carpet, etc.) Avoid poorly ventilated locations This machine generates a slight amount of ozone and other emissions during normal use. These emissions are not harmful to health. However, they may be noticeable during extended use or long production runs in poorly ventilated rooms. To maintain a comfortable working environment, it is recommended that the room where the machine operates be appropriately ventilated. Also avoid locations where people would be exposed to emissions from the machine. as this may result in a fire or electrical shock. • Insert the power plug completely into the AC power outlet. Failure to do so may result in a fire or electrical shock. • Remove the power plug completely from the AC power outlet during a thunder storm. Failure to do so may result in a fire, electrical shock, or damage to the machine. • Make sure that the power supply for the machine is safe, and has a steady voltage. • Keep the power cord away from a heat source; failure to do this may cause the power cord coating to melt, resulting in a fire or electrical shock. En Installation To use this machine safely and comfortably, carefully read the following precautions and install the machine in an appropriate location. WARNING Do not install in a location that may result in a fire or electrical shock • A location where the ventilation slots are blocked (too close to walls, beds, sofas, rugs, or similar objects) Do not install in a location where condensation occurs Water droplets (condensation) may form inside the machine when the room where the machine is installed is heated rapidly, and when the machine is moved from a cool or dry location to a hot or humid location. Using the machine under these conditions may result in paper jams, poor print quality, or damage to the machine. Let the machine adjust to the ambient temperature and humidity for at least 2 hours before use. Avoid the following situations: If excessive stress is applied to the connection part of the power cord, it may damage the power cord or the wires inside the machine may disconnect. This could result in a fire. - Connecting and disconnecting the power cord frequently. - Tripping over the power cord. - The power cord is bent near the connection part, and continuous stress is being applied to the power outlet or the connection part. - Applying excessive force on the power plug. • A damp or dusty location In altitudes of above sea level 3,000 m or • A location exposed to direct sunlight or higher CAUTION outdoors Machines with a hard disk may not operate • Install this machine near the power outlet • A location subject to high temperatures properly when used at high altitudes of about and leave sufficient space around the power • A location exposed to open flames 3,000 meters above sea level, or higher. plug so that it can be unplugged easily in an • Near alcohol, paint thinners or other flammable substances When using wireless LAN • Install the machine at a distance of 50 meters emergency. IMPORTANT Other warnings • Do not connect unapproved cables to this machine. Doing so may result in a fire or electrical shock. • Do not place necklaces and other metal objects or containers filled with liquid on the machine. If foreign substances come in contact with electrical parts inside the machine, it may result in a fire or electrical shock. • If any foreign substance falls into this machine, unplug the power plug from the AC power outlet and contact your local authorized Canon dealer. or less from the wireless LAN router. • As far as possible, install in a location where communication is not blocked by intervening objects. The signal may be degraded when passing through walls or floors. • Keep the machine as far as possible from digital cordless phones, microwave ovens, or other equipment that emits radio waves. • Do not use near medical equipment. Radio waves emitted from this machine may interfere with medical equipment, which may result in malfunctions and accidents. When connecting power • Do not connect the power cord to an uninterruptible power source. Doing so may result in malfunction of or damage to the machine at power failure. • If you plug this machine into an AC power outlet with multiple sockets, do not use the remaining sockets to connect other devices. • Do not connect the power cord to the auxiliary AC power outlet on a computer. Other precautions Electrical noise may cause this machine to malfunction or lose data. 26