Canon imageCLASS MF4880dw Starter Guide - Page 13
Check the following, Connect the LAN cable. - driver windows 7
View all Canon imageCLASS MF4880dw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Connecting to the Computer 1 Wired LAN Connection Check the following first. Windows Are the computer and the router (or hub) properly connected using a LAN cable? For details, see the instruction manual provided with your network device, or contact the manufacturer. Internet Router LAN Cable Have the network settings on the computer been complete? If the computer is not properly configured, you may not use the wired LAN connection even after completing the following settings. NOTE • You cannot connect both the wired LAN and wireless LAN at the same time. • When you connect to a network environment that is not security protected, your personal information could be disclosed to third parties. Please use caution. • If you connect through a LAN in the office, contact your network administrator. 2 Wired LAN Connection Connect the LAN cable. Windows The machine does not come with a LAN cable, router, or a hub. Have LAN Cable of Category 5 twisted pair cable or higher ready. Router (or Hub) LAN Cable Wait for approximately 2 minutes. The IP address will be automatically configured.* If the IP address on this machine has been changed: If the machine is on the same subnet as the computer, the connection is maintained. * If you want to manually configure the IP address: If you have set a static IP address to the IP address of the computer, manually configure a static IP Address. "Setting the IP Address" in the e-Manual 1 2 Preface Installing the Machine 3 Connecting to a Computer and Installing the Drivers 4 Configuring and Connecting the Fax 13