Canon imageCLASS MF5730 imageCLASS MF5770 Network Guide - Page 18
Settings Using NetSpot Device Installer, click [Open] on the pop-up menu.
View all Canon imageCLASS MF5730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Specifying the Network Settings 3 Execute the applicable command below to set the IP address for the network board. ping -l 479 Input Example: ping 172.20.88.125 -l 479 NOTE • The character "-l" is the alphabet letter "L." • The Subnet Mask and Gateway Address are set as . 2 The preparation for the machine's protocol settings is complete. Settings Using NetSpot Device Installer The following is the procedure for specifying the settings using NetSpot Device Installer. 1 Insert the CD-ROM supplied with the printer into the CD-ROM drive. 2 Double-click the [My Computer] icon on the screen ➞ right-click the CD-ROM drive icon ➞ click [Open] on the pop-up menu. 3 In the [NetSpot_Device_Installer] folder on the CD-ROM, run [nsdi.exe]. 4 From the list, select the device whose [Device Name] is the MAC address of the printer with displayed in [Status]. Preparation for Protocol Settings 2-7