Canon imageCLASS MF5880dn imageCLASS MF5880dn/5850dn Starter Guide - Page 9

Connect Power Cord and Turn On the Machine

Get Canon imageCLASS MF5880dn PDF manuals and user guides View all Canon imageCLASS MF5880dn manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

2 Set Up the Machine Connect Power Cord and Turn On the Machine 1 Connect the power cord into the rear socket on the back side of the machine and the wall outlet, and press the [I] side of the main power switch (A) to turn ON. 3 When appears, press or to select the country, and press [OK]. COUNTRY/REGION UNITED STATES - Do not remove the USB cap that covers the USB port on back side of the machine and do not connect the USB cable at this time. - Do not use a USB cable at this time. You will need a USB cable during the software installation procedure for USB connection. - If you want to use the optional paper cassette, attach the Paper Feeder Unit PF-44 to the machine before turning ON the machine. (For instructions on how to attach the Paper Feeder Unit PF-44, see "Attach the Optional Cassette to the Main Unit ," on p. 6.) 2 When appears, press or to select the language, and press [OK]. DISPLAY LANGUAGE ENGLISH If you want to change the display language at a later time, press [Menu] → → , then select the language. - Make sure that the country/region is selected correctly. If not, faxes may not be sent/received properly. - It is possible to change the country/region at a later time. To change the country/region, press [Menu] → → → , and then select the country/ region. 4 The machine enters the standby mode. 0 1 1 0 0 % LTR TEXT/PHOTO 5 Turn OFF the main power switch on the right side of the machine, wait for at least 10 seconds, and then turn ON the power to restart the machine. ● The display returns to the standby mode: The machine may enter the standby mode (Auto Clear function) while you are setting it up. Make the setting again from the main menu. ● The display turned OFF: The machine may enter the Sleep mode while you are performing setup. Press [Energy Saver] to turn the display back ON and continue the setup. ● / is displayed: Check the installation of the toner cartridge and the placement of the paper. (See "Unpack the Machine," on p. 3.) ● is displayed: Make sure that the front cover and scanning platform are closed properly. (See "Unpack the Machine," on p. 3.) 

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
7
2 Set Up the Machine
Connect Power Cord and Turn On the Machine
1
Connect the power cord into the rear socket
on the back side of the machine and the wall
outlet, and press the [I] side of the main power
switch (A) to turn ON.
Do not remove the USB cap that covers the USB port on
back side of the machine and do not connect the USB
cable at this time.
Do not use a USB cable at this time. You will need a USB
cable during the software installation procedure for
USB connection.
If you want to use the optional paper cassette, attach
the Paper Feeder Unit PF-44 to the machine before
turning ON the machine. (For instructions on how to
attach the Paper Feeder Unit PF-44, see “Attach the
Optional Cassette to the Main Unit ,” on p. 6.)
–
–
–
2
When <DISPLAY LANGUAGE> appears, press
or
to select the language, and press
[
OK
].
ENGLISH
DISPLAY LANGUAGE
If you want to change the display language at a later time,
press
[Menu]
→
<2. COMMON SETTINGS>
→
<6. DISPLAY LANGUAGE>, then select the language.
3
When <COUNTRY/REGION> appears, press
or
to select the country, and press
[
OK
].
UNITED STATES
COUNTRY/REGION
Make sure that the country/region is selected correctly.
If not, faxes may not be sent/received properly.
It is possible to change the country/region at a later
time. To change the country/region, press
[Menu]
→
<10. SYSTEM SETTINGS>
→
<6. COMMUNICATIONS>
→
<1. COUNTRY/REGION>, and then select the country/
region.
–
–
4
The machine enters the standby mode.
TEXT/PHOTO
100%
LTR
01
5
Turn OFF the main power switch on the right
side of the machine, wait for at least 10
seconds, and then turn ON the power to
restart the machine.
The display returns to the standby mode:
The machine may enter the standby mode (Auto Clear function) while you
are setting it up. Make the setting again from the main menu.
The display turned OFF:
The machine may enter the Sleep mode while you are performing setup.
Press
[Energy Saver] to turn the display back ON and continue the setup.
<SET TONER AGAIN>/<CHECK TONER CONNECT.> is
displayed:
Check the installation of the toner cartridge and the placement of the paper.
(See “Unpack the Machine,” on p. 3.)
<TONER COVER OPEN/CLOSE COVER> is displayed:
Make sure that the front cover and scanning platform are closed properly.
(See “Unpack the Machine,” on p. 3.)
●
●
●
●