Canon imageCLASS MF6180dw Getting Started Guide - Page 13

Setting a Paper Size and Type Following the instructions on the screen, set the paper size and type. Select Paper MP Tray 1 LTR:Plain Paper Settings Paper Settings Multi-Purpose Tray Drawer 1 Drawer 2 Register Custom Paper Specifying Initial Fax Settings and Connecting a Telephone Cable 1 Specify the initial fax settings. 3 Exit the Fax Setup Guide, and then restart the machine. End Fax Setup Guide? Yes No Setting is complete. Turn the main power OFF and ON. OK Turn OFF the machine and wait for at least 10 seconds before turning it ON again. The telephone line types are not detected automatically. See the e-Manual and set a telephone line manually. e-Manual "Fax" ▶ "Using the Fax Functions" ▶ "Changing Fax Settings (Settings that Can Be Specified Using the [Menu] Button)" ▶ "Configuring Send Settings" ▶ "Select Line Type" Installing the Driver/Software Install the driver and software using the User Software and Manuals CD-ROM. For details on the installation procedures, see the MF Driver Installation Guide. You can also download the driver from the Canon website. Perform fax setup? Set up Now Set up Later Connect phone line. Follow illustrations on the next screen: Connect line to A. *Next : Press OK Follow the "Fax Setup Guide" to specify a fax number, a unit name, and a receive mode. For more details on the receive mode, see the e-Manual. e-Manual "Fax" ▶ "Using the Fax Functions" ▶ "Receiving Faxes" ▶ "RX Mode" How to use a user name When you send a document, the sender information that you registered is printed on the recipient's paper. 2 Connect a telephone cable. (B) (A) Telephone line connector Telephone When appears on the display, connect the telephone cable by referring to the illustration. Windows Macintosh En 13