Canon imageCLASS MF6590 imageCLASS MF6500 Series Reference Guide - Page 227
Network Problems (MF6595cx/MF6595/MF6590/MF6540 Only
View all Canon imageCLASS MF6590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
Before Using the Machine 1 Document and Paper 2 Copying 3 Sending and Receiving (MF6595cx/ MF6595/MF6590 Only) 4 Printing and Scanning 5 Network (MF6595cx/MF6595/ 6 MF6590/MF6540 Only) Remote UI (MF6595cx/MF6595/ 7 MF6590/MF6540 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 Back Previous Next TOP Network Problems (MF6595cx/MF6595/MF6590/MF6540 Only) Unable to print from a TCP/IP network. Q Are the machine and cable properly connected? A Check that the machine is connected to the network using the proper cable, then restart the machine. (See "Software Settings with Computer," in the Starter Guide.) Q Is the TCP/IP network properly set up? A Make sure the IP addresses are properly set up. If the IP addresses are set using DHCP, BOOTP, or RARP, make sure they are operating. Q Is the computer that is printing properly set up? A Make sure the proper printer driver is installed. (See "Software Settings with Computer," in the Starter Guide.) A Make sure the correct machine is set as the output destination for the computer that is printing in [Printers and Faxes] or Print Manager. Q Is the name of the file being printed too long? A Rename the file with a shorter name. Normally LPR (or the Microsoft TCP/IP Printer, if you are using Windows 2000/XP/Server 2003/Vista) sends jobs either under the name of the application software used for printing, or the file name. However, a job name longer than 255 bytes cannot be sent to the machine. The printer port name is not displayed in [Print to the following port (s)]. Q Are the machine and cable properly connected? A Check that the machine is connected to the network using the proper cable, then restart the machine. (See "Software Settings with Computer," in the Starter Guide.) Q Is the computer that is printing properly set up? A Make sure the proper printer driver is installed. (See "Software Settings with Computer," in the Starter Guide.) A Make sure the correct machine is set as the output destination for the computer that is printing in [Printers and Faxes] or [Printers]. Table of Contents Index 10-40