Canon imageCLASS MF7280 imageCLASS MF7280 Reference Guide - Page 125
Standard Paper for the Stack Bypass, Press, Additional Functions, Common Settings].
![]() |
View all Canon imageCLASS MF7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Standard Paper for the Stack Bypass You can set the paper size and type that the stack bypass uses beforehand. This setting is useful if you always load the same paper size and type into the stack bypass. IMPORTANT When printing on special types of paper, such as heavyweight paper or transparencies, be sure to correctly set the paper type, especially if you are using heavyweight paper. If the type of paper is not set correctly, it could adversely affect the quality of the image. Moreover, the fixing unit may become dirty and require a service repair, or the paper 3 could jam. NOTE • If you are using the stack bypass as a paper source for the Copy function, you must select the stack bypass when specifying the Drawer Eligibility for APS/ADS setting. (See "Auto Paper Selection/Auto Drawer Switching," on p. 3-26.) • The default setting is 'Off'. Customizing Settings 1 Press (Additional Functions) ➞ [Common Settings]. If necessary, see the screen shot in step 1 of "Initial Function at Power ON," on p. 3-15. 2 Press [▼] or [▲] until [Stack Bypass Standard Settings] appears ➞ press [Stack Bypass Standard Settings]. 3-34 Specifying Common Settings
![](/manual_guide/products/canon-mf7280-imageclass-mf7280-reference-guide-240c034/125.png)