Canon imageCLASS MF7280 imageCLASS MF7280 Network Quick Start Guide - Page 14
Connecting to a Network
![]() |
View all Canon imageCLASS MF7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Connecting to a Network Connect the machine's RJ-45 connector to a hub port using a Category 5 twisted pair LAN cable. 1 PC with 100Base-TX Connector PC with 10Base-T Connector Connecting the Machine to a Network Ethernet Cable Hub IMPORTANT You cannot use the machine as a repeater, bridge, or gateway. NOTE • The machine can automatically detect the type of Ethernet (10Base-T or 100Base-TX). • If you are using a mixed 10Base-T/100Base-TX environment, devices on the network (hubs, routers, etc.) must support the mixed environment. For more information, consult your local authorized Canon dealer. • After connecting the network cable, perform the following operations. (For more information, see the relevant descriptions.) - Set the date and time, and System Manager settings. (See Chapter 5, "System Manager Settings," in the Reference Guide.) - Set the network settings. (See the Network Guide.) - Install a printer driver if necessary. (See Chapter 2, "Installing Software.") 1-4 Connecting the Machine
![](/manual_guide/products/canon-mf7280-imageclass-mf7280-network-quick-start-guide-dcaf8a1/14.png)