Canon imageCLASS MF7280 imageCLASS MF7280 Network Quick Start Guide - Page 20

Installing Software Software Installation Instructions This section describes how to install the printer driver and other software included on the CD-ROMs. 2 Installing a Printer and/or Fax Driver IMPORTANT • Do not connect the USB cable before installing the software. If you connect the USB cable before installing the software and the Found New Hardware Wizard screen appears, click [Cancel]. • For Windows NT/2000/XP/Server 2003, log on as Administrator to install the software. • Make sure the machine is turned on before connecting the USB cable. NOTE • The UFR II printer driver is not available for Windows NT. • In Windows NT, you cannot print and send a fax from your computer through a USB connection. • In Windows NT, you cannot use the Installer to install the PCL printer and fax drivers. Double-click the [Setup.exe] icon in the PCL or FAX\us_eng folder on the CD-ROMs to install the drivers. • You cannot use the Installer to install the fax driver through the USB connection. Double-click the [Setup.exe] icon in the FAX\us_eng folder on the UFR II Printer Kit/ Super G3 FAX Board CD-ROM to install the driver. • In a USB environment, you cannot set up the printer configuration automatically or use the Job Accounting feature. • The following procedure is an example using the Installer on the UFR II Printer Kit/Super G3 FAX Board CD-ROM. 2-4 Software Installation Instructions