Canon imageFORMULA CR-50 CR-50/80 Installation Guide - Page 18
Squeeze the Print Position Adjustment Lever and move it, Carefully replace the Imprinter Cover.
![]() |
View all Canon imageFORMULA CR-50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
IMPORTANT Make sure that the ink cartridge lock lever locks the ink cartridge into the correct position. If the ink head drops back when installed, the two ink cartridge pins will not fit into the holes on the carriage. Push back the ink cartridge lock lever a in the direction of the arrow and reset the cartridge in the correct position b. Ink Cartridge Lock Lever If the cartridge does not load properly, see step 7. 7 Squeeze the Print Position Adjustment Lever and move it to adjust the print position. Ink Cartridge Ink Cartridge Holes Pins 8 Carefully replace the Imprinter Cover. Top: 50.5 mm (1.99") from the bottom edge of the document Middle: 47 mm (1.85") from the bottom edge of the document Bottom: 43.5 mm (1.71") from the bottom edge of the document 9 Gently close the Maintenance Cover until it clicks into place. 18
![](/manual_guide/products/canon-imageformula-cr50-cr5080-installation-guide-77a3208/18.png)