Canon imageFORMULA DR-4010C Color Reference Guide - Page 18

1-4 Installation Requirements To use the DR-4010C scanner, your computer must satisfy the following system requirements. • One of the following operating systems: - Microsoft Windows 2000 Professional SP4 or later - Microsoft Windows XP Professional SP2 or later - Microsoft Windows XP Home Edition SP2 or later - Microsoft Windows XP Professional x64 Edition • A computer that meets the following specifications: - CPU: Pentium 4 (3.2 GHz or faster) - Memory: 1 GB or more - Hard disk: 1 GB or more available space - Interface: USB port present as standard equipment on the computer (Hi-Speed USB 2.0) or SCSI expansion card - Monitor: Resolution of 1024 × 768 (XGA) or better recommended. • When using a SCSI expansion card, select one of the following recommended models. SCSI cards made by Adaptec (for PCI bus) - AHA-2930U - AHA-2940AU - ASC-19160 - ASC-29160N SCSI card made by Adaptec (for Card bus) - APA-1480 • An ISIS-compatible application or a TWAIN-compatible application that is compatible with the above operating systems. IMPORTANT • If you do not know the requirements for your computer system, contact the store where you purchased the computer or the manufacturer of the computer for more information. • Do not connect both a USB interface and a SCSI card at the same time. • Be aware of the following information when using the USB interface that was provided as standard with your computer. - The USB interface should be a Hi-Speed USB 2.0 interface. - Scanning speeds are lower if your computer's standard USB interface is USB Full-Speed (equal to USB 1.1.) In this case, using a SCSI expansion card is recommended. - Use the latest USB 2.0 driver made available by Microsoft. For details, consult your local authorized Canon dealer. 14 Before Using the Scanner