Canon imageFORMULA DR-6010C DR-6010C Users Manual - Page 105
High-Speed Text Enhancement], 256-level Gray], 24-bit Color], Auto Color Detection]
View all Canon imageFORMULA DR-6010C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Chapter 7 ISIS/TWAIN Driver Settings ☞ Documents with low-contrast text can be made more readable by adjusting Contrast on the [Brightness] tab sheet. ☞ If the background is non-uniform, such a pattern, the background remains visible in the image, and text may be hard to read. [High-Speed Text Enhancement] This mode optimizes processing speed by performing background processing within the scanner, and is good for scanning documents with light background and dark text. ☞ If the text and background in a document have nearly the same density, the text may be hard to read. ☞ Areas with uniform background may appear as non-uniform white in the image. ☞ Because background processing is performed within the scanner, scanned images are more susceptible to lines appearing due to dirt on the scanning table glass. In cases where this may be a problem, try scanning again after cleaning the scanner glass, or select one of the [Advanced Text Enhancement] or [Advanced Text Enhancement II] modes instead. [256-level Gray] Scans documents such as photos as 256-level grayscale images. [24-bit Color] Scans documents such as color photos as full-color images. [Auto Color Detection] Whether a document is black and white or color is detected before the scanned image is saved. ☞ When [Auto Color Detection] is enabled, the [Setting] button is enabled for opening the [Auto Color Detection] dialog box, where you can make settings affecting how color documents are judged, and select which scanning mode to use for black and white. ☞ Depending on the application program, operation may become unstable when [Auto Color Detection] is enabled. In that case, [Auto Color Detection] should be disabled. ☞ When using an application that supports the MultiStream function (such as CapturePerfect), if [Auto Color Detection] is selected, the MultiStream function is disabled. 7-6