Canon imageFORMULA DR-M160II NA10 User Manual - Page 13
Scanning with Scanner Start Button, Start the CaptureOnTouch Job Tool. - document scanner
View all Canon imageFORMULA DR-M160II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
• By tapping [ ] - [Select all] or [Deselect], you can select all jobs or cancel the selected state. 2 Tap [ ]. A confirmation message appears. 3 Tap [OK]. The selected job(s) is deleted. Scanning with Scanner Start Button You can copy a job registered in the CaptureOnTouch Job Tool to the scanner, then scan according to those scan job settings by pressing the scanner's start button. In this scanning method, since the NA10 controls the scanner, the smart device is not needed to execute scanning. 1 Start the CaptureOnTouch Job Tool. The [Scan from app job] screen appears. Hint You can change the screen displayed at startup by tapping [ ] and selecting [Initial screen setting]. 2 Select the scanner. A Tap [ ]. B Select the scanner on the [Select Scanner] screen. 3 Tap [ ], or tap [ ] - [Copy job registration settings]. 4 Enter the administrator password. Enter the same password as for the Web menu. For details, see "Displaying the Web Menu of This Device" (p. 21). 5 Tap [OK]. All registered jobs are registered in the scanner at once. CAUTION The number of jobs that can be copied depends on the scanner. 6 Select the job number on the scanner and press the start button. Scanning executes according to the scan settings of the selected job number. During scanning, the power light of the device blinks blue. It lights steadily blue when scanning and data transmission are completed. CAUTION • If the scanner does not detect the document (there is no document in the feeder) when scanning starts, the Connection lamp lights orange. • If data cannot be sent, such as because of an invalid destination, a transmission error occurs and the Connection lamp lights red. • If you copy jobs registered in the CaptureOnTouch Job Tool to the scanner, you cannot use the favorite settings assigned by CaptureOnTouch to the job buttons on the scanner itself. If you want to use CaptureOnTouch favorite settings, first delete from the scanner all jobs copied from the CaptureOnTouch Job Tool. 13