Canon imagePROGRAF GP-2000 imagePROGRAF GP-4000 GP-2000 series User Manual Win - Page 286

By flicking the touch screen, you can check various settings of wireless direct. Connecting Smartphone/Tablet to Printer 1. Turn on wireless communication on your device. Enable "Wi-Fi" on your device's "Setting" menu. For more on turning on wireless communication, see your device's instruction manual. 2. Select "DIRECT-XXXX-GP-NNNN" ("X" represents alphanumeric characters, NNNN means your printer model name.) from list displayed on device. Note • If "DIRECT-XXXX-GP-NNNN" does not appear on the list, wireless direct is not enabled. See Changing Printer Setting to enable wireless direct. 3. Enter password. Your device is connected to the printer. Note • Check the password for the wireless direct. 1. Flick HOME screen and tap LAN settings. 2. Tap Wireless Direct. 3. Tap Show password. • Depending on the device you are using, entering the password is required to connect a device to the printer via Wi-Fi connection. Enter the password specified for the printer. • If your Wi-Fi Direct compatible device is set to prioritize using Wi-Fi Direct and it is connecting to the printer, the printer displays a confirmation screen asking if you allow the device to connect to the printer. Make sure the name on the touch screen is the same as that of your wireless communication device and tap Yes. Changing Direct Connection Setting Change the settings for the wireless direct following the procedure below. 1. Make sure printer is turned on. 2. Flick HOME screen and tap LAN settings. Home Screen Menu Composition 286