Canon imagePROGRAF GP-2000 imagePROGRAF GP-4000 GP-2000 series User Manual Win - Page 631

Paper Source Shows the source from which paper is supplied. You may be able to switch the paper source with the printer driver. Roll Paper (Auto) Depending on the paper settings on the printer driver and the paper information registered to the printer, the printer automatically determines which roll paper to use and then feeds that paper. Roll 1 Feeds paper from Roll 1. Roll 2 Feeds paper from Roll 2. Cut Sheet Feeds paper using the cut paper. Important • Depending on the media type and size, the Paper Source settings that can be selected may differ. Roll Paper Width Select the roll paper width. Select the width that matches the width of the roll paper loaded in the printer. If you select Custom Size (XXXX), the paper size set in the printer will be used. The paper information set in the printer can be confirmed in Get Information... in the Main sheet. If you select User-defined1 (XXXX) or User-defined2 (XXXX), the Custom Size Settings dialog box is displayed, where you can specify the paper length and width. Roll Paper Options... Displays the Roll Paper Options dialog box. You can specify auto cut, banner printing, and other settings for printing on roll paper. Output Method... Displays the Output Method dialog box. You can select Output Method and specify save settings for saving documents to a box. Size Options... Displays the Paper Size Options dialog box. The Paper Size Options dialog box allows you to create and register any user-defined paper. Custom Size Settings dialog box (Paper Size) This dialog box allows you to specify the size (width and height) of the custom paper. Paper Size Specifies the Width and the Height of the custom paper. Measurement is shown according to the units specified in Units. Units Select the unit for entering a user-defined paper size. 631