Canon imagePROGRAF GP-300 imagePROGRAF GP-300 GP-200 series User Manual - Page 111
Manual when using media that cannot be cut with the cutter blade
View all Canon imagePROGRAF GP-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Note • If the Home screen does not appear, press the HOME button. 2. Tap Paper settings. 3. Tap Advanced. 4. Tap Cutting mode. 5. Tap Eject cut. 6. Print the job. When printing is finished, the printer will stop without cutting. 7. While holding the printed document from the bottom edge to prevent it from dropping, tap Cut paper to cut the roll paper. Manual (when using media that cannot be cut with the cutter blade) Note • Once the following step has been performed, the procedure can be started from step 8 the next time. Printing the second and subsequent times Printing after replacing with the same type of paper 1. Tap paper settings display area on Home screen of operation panel. 111
Note
•
If the Home screen does not appear, press the
HOME
button.
•
2.
Tap
Paper settings
.
2.
3.
Tap
Advanced
.
3.
4.
Tap
Cutting mode
.
4.
5.
Tap
Eject cut
.
5.
6.
Print the job.
6.
When printing is finished, the printer will stop without cutting.
7.
While holding the printed document from the bottom edge to prevent it from dropping, tap
7.
Cut paper
to cut the roll paper.
Manual (when using media that cannot be cut with the cutter blade)
Note
•
Once the following step has been performed, the procedure can be started from step 8 the next time.
•
Printing the second and subsequent times
Printing after replacing with the same type of paper
1.
Tap paper settings display area on Home screen of operation panel.
1.
111