Canon imagePROGRAF GP-300 imagePROGRAF GP-300 GP-200 series User Manual - Page 267
Settings on Client PC
![]() |
View all Canon imagePROGRAF GP-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 267 highlights
Settings on Client PC After setting up the print server system, set up the client system. The procedure for setting up the client systems is as follows: 1. Install the printer driver on the client systems 2. Display the printer list Open System Preferences, and select Printers & Scanners. Click + to display the printer list. 3. Add a printer to be shared Select a shared printer displayed in the printer list, and then click Add. The setup on the client systems is now completed. Note • The print procedures are the same as when the computer is connected directly to the printer with a USB cable. At the Page Setup dialog, select the printer that is connected to the print server to be used. 267
![](/manual_guide/products/canon-imageprograf-gp200-imageprograf-gp300-gp200-series-user-manual-b0fa3d9/267.png)
Settings on Client PC
After setting up the print server system, set up the client system.
The procedure for setting up the client systems is as follows:
1.
Install the printer driver
on the client systems
1.
2.
Display the printer list
2.
Open
System Preferences
, and select
Printers & Scanners
.
Click
+
to display the printer list.
3.
Add a printer to be shared
3.
Select a shared printer displayed in the printer list, and then click
Add
.
The setup on the client systems is now completed.
Note
•
The print procedures are the same as when the computer is connected directly to the printer with a USB
cable.
At the Page Setup dialog, select the printer that is connected to the print server to be used.
267