Canon imagePROGRAF TA-30 TA-20 / TA-30 Setup Guide - Page 12

Loading Paper To load paper, on the home screen, select Load paper, and follow the instructions on the screen. For details, refer to the Online Manual. => "Displaying the Online Manual" on p.11 For Best Print Quality To achieve the best print results, it is recommended that you adjust the print head after setup is complete*. For details, refer to the Online Manual. => "Displaying the Online Manual" on p.11 * Print head adjustment is required before performing borderless printing. Displaying the Online Manual The Online Manual describes how to use the printer. It can be accessed from the Canon website as shown below. 1 Access the Canon website by any of the following methods. ● Enter the URL ● Scan the QR code (An app is needed in order to scan the QR code) Printing From a Smartphone or Tablet With the "Canon PRINT Inkjet/SELPHY" application software, you can easily, wirelessly print photos stored on your smartphone or tablet (running iOS or Android). You can download this application by accessing the following QR code. 2 Select Read Online Manual. ●Perform the remaining operations by following the instructions on the screen to display the Online Manual. Responding to Messages Messages may appear on the touch screen of the operation panel when setting up printer. If so, it may not indicate a problem with the printer, and the issue may be easily resolved. Common messages and the causes are listed here with corrective actions. For details on other messages, refer to the Online Manual. Message Check if ink tank is set, and its color and direction. Print head cannot be recognized correctly. Open the top cover and install the correct print head. Hardware error ECxx-xxxx (x represents a letter or number) Printer error has occurred. Turn the device off, wait a while, and then turn it on again. Error Ecxxx-xxxx (x represents a letter or number) Printer error has occurred. See the manual and contact the service center. Cause There is no ink tank loaded. The ink tank is not firmly installed all the way in. The print head is not installed. Electrical contact failure in the print head. You may have encountered an error that cannot be resolved. You may have encountered an error that cannot be resolved. Corrective Action Install or reinstall the ink tank. (Refer to steps 1 to 8 on p.6 and p.7) Install the print head. (Refer to steps 1 to 10 on p.7 and p.8) Remove the print head, make sure that no debris becomes adhered to the electrical contacts on the print head and the carriage, and then reinstall the print head. Turn off the printer and wait at least 3 seconds before restoring the power. If the message appears again, write down the error code and message, turn off the printer, and contact your Canon dealer for assistance. Write down the error code and message, turn off the printer, and contact your Canon dealer for assistance. 11