Canon imagePROGRAF TM-200 series User Manual - Page 492
Paper Size, Processing, Banner Printing, Print Centered, Automatic Cutting, Paper Detailed
View all Canon imagePROGRAF TM-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 492 highlights
Important • If the Borderless Extension slide bar is set to the far right position, the back of the paper may come out stained. 6. Complete setting process Click Print. If you print now, the document will be printed by filling in the entire surface of the paper. Important • The available paper sizes for Borderless Printing are pre-determined. From Paper Size, select the paper displayed as "Borderless." • If you try to set borderless printing, in Page Processing, Banner Printing and Print Centered will be displayed in gray and you will not be able to configure them. • Depending on paper size, the length/width ratio of the paper may be different from that of the image, making it impossible for the whole image to fit on the paper. When this happens, crop the image with the application software to match paper size. • When printing borderless, printing may stop abruptly and the paper will be cut causing a slight color unevenness on the edges of the paper. If you require particularly high quality, under Page Processing, Automatic Cutting, select None. When you do so, the document will be printed without the left and right margins. After the printed material has exited the printer and has been cut, cut the upper and lower edges with a pair of scissors. • When printing borderless on paper with low ink-fixing properties, depending on frequency of use, the cutter unit may come into contact with the paper surface scratching it and causing the paper to be unevenly cut. You may be able to improve the situation by choosing Paper Detailed Settings and set Dry Time (Between Pages) to a higher value. 492