Canon imagePROGRAF TM-200 series User Manual - Page 623
Paper rubs against the Print Head
View all Canon imagePROGRAF TM-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 623 highlights
Paper rubs against the Print Head Check 1 Is the media type specified in the printer driver the same as the media type loaded in the printer? Load paper of the same type as you have specified in the printer driver. Loading Rolls in the Printer Loading Sheets in the Printer Follow the steps below to match the media type in the printer driver to the media type loaded in the printer. 1. To stop printing, press the Stop button. 2. Change the paper type in the printer driver and try printing again. Check 2 Is the paper loaded properly? If not loaded properly, paper can buckle and rub against the print head. Reload the paper. Loading Rolls in the Printer Loading Sheets in the Printer Check 3 Is the print head height set too low? Set Paper Thickness (Head Height) in the touch screen menu to Auto. Troubleshooting Paper Abrasion and Blurry Images Check 4 Is the paper thick, or a type that curls easily or is prone to buckling after absorbing ink? If using paper-based printing material such as Heavyweight Coated Paper, set Transport unit vacuum strength in the touch screen menu to Medium-strong or Strong. If that does not resolve the problem, increase the Paper Thickness (Head Height) setting in the touch screen menu. Adjusting Vacuum Strength Troubleshooting Paper Abrasion and Blurry Images If using film-based printing material such as CAD Tracing Paper, set the Transport unit vacuum strength in the touch screen menu to Standard, Medium-strong, or Strong. If that does not resolve the problem, increase the Paper Thickness (Head Height) setting in the touch screen menu. Adjusting Vacuum Strength Troubleshooting Paper Abrasion and Blurry Images 623