Canon imagePROGRAF iPF6000S iPF6000S User Manual - Page 703

Messages regarding paper Roll feed unit err Cause The Roll Feed Unit is not working. Corrective Action Turn off the printer, remove the Roll Feed Unit momentarily, and then reinstall it. (→P.143) (→P.144) If the message is still displayed after you do this, contact your Canon dealer for assistance. No Roll Feed Unit. Cause The printer has received a print job that species rolls, but the Roll Feed Unit is not installed. Corrective Action Install the Roll Feed Unit and resend the print job. (→P.144) Sheet printing is selected. Cause Corrective Action You have attempted to print a test print sheet or other Load a sheet and try printing again. printer status information on a sheet, but no sheet is loaded. To print on a roll instead, hold the Stop button for more than a second to cancel printing, load a roll, and then print. (→P.88) Manual printing is selected, but a roll is loaded. Cause A print job for manually printing on sheets was sent when a roll is loaded. Corrective Action Follow these step to reload a sheet. 1.Press the Load/Eject button. The roll can now be removed. 2.Load paper of the type and size you have specied in the printer driver. The printer will resume printing. If there is a printed roll in the Output Tray, follow these steps to cut the roll and load a sheet. 1.Hold down the Stop button for a second or more to cancel printing. 2.Select Paper Cutting in the printer menu and cut the roll at the desired position. (→P.132) 3.Load paper of the type and size you have specied in the printer driver and resend the print job. (→P.93) Follow these steps when printing on a roll. 1.Hold down the Stop button for a second or more to cancel printing. 2.Change the printer driver settings to match the roll already loaded, and then resend the print job. Error Message 689