Canon imagePROGRAF iPF750 iPF750 User Manual Ver.1.30 - Page 677
Adj. Fine Feed, Head Cleaning B
View all Canon imagePROGRAF iPF750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 677 highlights
Printer Parts > Control Panel > Adjust Printer Feed Priority Setting Item Adj. Quality Auto(OtherPaper) Description, Instructions Specify this mode with paper not in the Paper Reference Guide. The printer prints and reads a test pattern for automatic adjustment of the feed amount. Note that this function takes more time and consumes more ink than Auto(GenuinePpr). (See "Automatic Banding Adjustment (Adj. Quality).") →P.616 Manual Use this mode with highly transparent media or other paper for which Auto(GenuinePpr) or Auto(OtherPaper) cannot be used. Print a test pattern for adjustment of the feed amount based on the type of paper. (See "Manual Banding Adjustment (Adj. Quality).") →P.618 Adjust Length AdjustmentPrint A:High Print a test pattern for particular types of paper to compensate for paper stretching or shrinkage, after which you enter the amount of adjustment. (See "Adjusting Line Length (Adjust Length).") →P.620 B:Standard/Draft Chang e Settings A:High Displayed when you have selected Feed Priority > Adj. Priority > Print Length. Adjustment relative to the amount of stretching or shrinkage of the current paper. Enter either the adjustment results from Adjustment- Print or the discrepancy that you measured (as a per- centage). For paper that tends to stretch, increase the feed 8 amount by choosing a higher adjustment value. For paper that tends to shrink, decrease the feed amount by choosing a lower adjustment value. B:Standard/Draft Adj. Fine Feed Displayed when you have selected Feed Priority > Adj. Priority > Automatic or Print Quality. Finetune the feed amount manually during printing. (See "Fine-Tuning the Paper Feed Amount (Adj. Fine Feed).") →P.620 Maintenance Head Cleaning Clean the Printhead. (See "Cleaning the Printhead.") →P.729 Choose Head Cleaning A if printing is faint, oddly colored, or contains foreign substances. Choose Head Cleaning B if no ink is printed at all, or if printing is not improved by Head Cleaning A. Nozzle Check Replace P.head Print a test pattern to check the nozzles. 661 When replacing the Printhead, choose Yes and follow the instructions on the screen. (See "Replacing the Printhead.") →P.730 Not displayed during a warning message that the re- maining Maintenance Cartridge capacity is low. Repl. maint cart When replacing the Maintenance Cartridge, choose Yes and follow the instructions on the screen. (See "Replacing the Maintenance Cartridge.") →P.737 iPF750 Menu Settings