Canon imagePROGRAF iPF750 iPF750 User Manual Ver.1.30 - Page 818

Error Message > Messages regarding paper > Paper is crooked. Cause Paper loaded crooked was detected when the paper was advanced. Corrective Action Follow these steps to reload the roll. 1. Push the Release Lever back. 2. Adjust the right edge of the roll to make it par- allel to the orange Paper Alignment Line. 3. Pull the Release Lever forward. (See "Loading Rolls in the Printer.") →P.572 If this error recurs after you reload the roll, remove the Roll Holder from the printer, push the roll firmly in until it touches the Roll Holder flange, and reload the Roll Holder in the printer. (See "Attaching the Roll Holder to Rolls.") →P.568 Follow these step to reload a sheet. 1. Push the Release Lever back. 2. Pull out the sheet. 3. Pull the Release Lever forward. 4. Reload the sheet, aligning it with the guide on the right. (See "Loading Sheets in the Printer.") →P.594 Note • To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or Loose in the Skew Check Lv. setting of the printer menu. However, this may cause jams and printing problems because paper may be askew when printed. Also, the Platen may become soiled, which may soil the back of the next document when it is printed. 12 Paper not aligned with right guide. Cause Corrective Action When paper was loaded, it was not aligned with the guide Follow these step to reload a sheet. on the right side. 1. Push the Release Lever back. 2. Pull out the sheet. 802 3. Pull the Release Lever forward. 4. Reload the sheet, aligning it with the guide on the right. Cannot detect papr Cause Corrective Action The paper has come out of the printer. Follow these step to reload a sheet. Paper is crooked. iPF750