Canon imagePROGRAF iPF780 MFP M40 User Guide - Page 459

iPF780 Setting Item GL2 Set- Quality Color tings Manager Mode Color (CAD) 3 Color (CAD) 4 Color (CAD) 5 Print Quality Input Resolution Print (Economy) Paper Paper Source Manager Margin Conserve Paper Auto Rotate Line & Enable merge Pen Manager Pen Set- Select Palette up Define Palette User's Guide Menu Settings Description, Instructions Print with approximate colors emulating Canon iPF500, iPF600, iPF700, iPF510, iPF610, iPF710, iPF605, iPF720, iPF810, iPF820, iPF815, iPF825.(*2) Print emulating the HP Designjet 500/800, in colors resembling colors produced by these printers.(*2) Print emulating the HP Designjet T1100, in colors resembling colors produced by this printer.(*2) Choose the print quality. Choose the printer input resolution, 600dpi or 300dpi. When On is selected, print using less ink. However, the quality is lower than regular printing. Select On to conserve ink such as the layout confirmation. Note that although Print (Economy) is only available when Fast is selected in Print Quality, it might not be available depending on the paper type. Choose the source of paper for HP-GL/2 printing. Specify the margin around paper. The margin for the trailing edge of sheets is 23 mm (0.9 in). However, if you have specified the leading margin in Paper Details, the larger of the setting values has priority. Conserves paper when printing. If the long side of an original is shorter than the roll width, the original is automatically rotated 90 degrees to conserve paper. Similarly, if the long side of an original in landscape orientation is longer than the roll width and the short side is shorter than the roll width, the original is repositioned to fit on the paper. HP RTL print jobs are not rotated. Because HP RTL images are not rotated even if the paper is rotated 90 degrees, images may be cut off or the blank paper may be ejected. In this case, set Auto Rotate to Off. Specify whether to merge or print over colors where lines overlap. Choose Off to print the second line over the first. Choose On to merge all overlapping colors. As pen values, choose Software, Palette A, Palette B, or Factory. Choose Software to print according to software settings. Choose Palette A or Palette B to print using the value specified in Define Palette. Specify the Width, Color, and Line Attributes in the palette Pen no.. Choose Factory to confirm the values when Factory is selected in Select Palette. In Line Attributes, choose No Setting or Circle Setting as the processing for the ends and junctions of lines. • If you choose No Setting 459 Printer Menu Control Panel