Canon imagePROGRAF iPF780 MFP M40 User Guide - Page 599
HP-GL/2 problems, With HP-GL/2, printing is misaligned
View all Canon imagePROGRAF iPF780 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 599 highlights
iPF780 With HP-GL/2, printing is misaligned HP-GL/2 problems With HP-GL/2, printing is misaligned ...599 Lines or images are missing in printed HP-GL/2 jobs 599 Lines are printed too thick or thin in HP-GL/2 print jobs 599 HP-GL/2 jobs are printed in monochrome (or color 599 Printed colors of lines are inaccurate during HP-GL/2 printing 599 HP-GL/2 jobs are printed 6 mm larger than specified 600 HP-GL/2 jobs are printed at maximum size, even if a standard size is specified 600 HP-GL/2 printing takes a long time ...600 Replotting with HP-GL/2 jobs is not possible...600 The printer stops when printing a HP-GL/2 job (the carriage stops moving 600 With HP-GL/2, printing is misaligned Cause The plotter origin is incorrect. Corrective Action Check the printing commands. The Margin setting in the Control Panel menu is incorrect. Adjust the Margin setting values in the Control Panel menu. Troubleshooting Lines or images are missing in printed HP-GL/2 jobs. The memory is full. Cause Corrective Action Check the size of the data in the print job. An HP-GL/2 command not supported by this printer was received. Check the print job and settings. The printer has received print data that includes HP RTL commands when Auto Rotate is On in the Control Panel menu. PageSizeProcess1 in the Control Panel menu is set to On. In the Control Panel, set Auto Rotate to Off and print again. (See "Menu Settings.") ➔P.454 Set PageSizeProcess1 to Off in the Control Panel menu. (See "Menu Settings.") ➔P.454 HP-GL/2 problems Lines are printed too thick or thin in HP-GL/2 print jobs Cause The Width setting in the Control Panel menu is incorrect. ThickenFineLines in the Control Panel menu is set to Off. Corrective Action Change the Width setting configured in Pen no. of the Palette A or Palette B selected in the Control Panel menu. (See "Menu Settings.") ➔P.454 If fine lines are printed faintly, setting ThickenFineLines to On will print the lines more distinctly. (See "Menu Settings.") ➔P.454 HP-GL/2 jobs are printed in monochrome (or color) Cause The Color Mode setting in the Control Panel menu is incorrect. Corrective Action Check the Color Mode setting in the Control Panel menu. (See "Menu Settings.") ➔P.454 However, for optimal Printhead performance, the printer consumes trace amounts of color ink even when Monochrome is selected as Color Mode. Printed colors of lines are inaccurate during HP-GL/2 printing Cause Corrective Action 599 AdjustFaintLines is On in the Control Panel menu. Setting AdjustFaintLines to Off in the Control Panel menu may help produce the expected results. However, lines in some colors may appear broken. User's Guide