Canon imagePROGRAF iPF780 MFP M40 Basics Guide - Page 106
HP-GL/2 problems, With HP-GL/2, printing is misaligned
View all Canon imagePROGRAF iPF780 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Troubleshooting With HP-GL/2, printing is misaligned iPF780 Series HP-GL/2 problems With HP-GL/2, printing is misaligned ...106 Lines or images are missing in printed HP-GL/2 jobs 106 Lines are printed too thick or thin in HP-GL/2 print jobs 106 HP-GL/2 jobs are printed in monochrome (or color 106 Printed colors of lines are inaccurate during HP-GL/2 printing 106 HP-GL/2 jobs are printed 6 mm larger than specified 107 HP-GL/2 jobs are printed at maximum size, even if a standard size is specified 107 HP-GL/2 printing takes a long time ...107 Replotting with HP-GL/2 jobs is not possible 107 The printer stops when printing a HP-GL/2 job (the carriage stops moving 107 With HP-GL/2, printing is misaligned Cause The plotter origin is incorrect. The Margin setting in the Control Panel menu is incorrect. Corrective Action Check the printing commands. Adjust the Margin setting values in the Control Panel menu. Lines or images are missing in printed HP-GL/2 jobs. Cause The memory is full. An HP-GL/2 command not supported by this printer was received. The printer has received print data that includes HP RTL commands when Auto Rotate is On in the Control Panel menu. Corrective Action Check the size of the data in the print job. Check the print job and settings. In the Control Panel, set Auto Rotate to Off and print again. (See "Menu Settings.") ➔User's Guide Lines are printed too thick or thin in HP-GL/2 print jobs Cause The Width setting in the Control Panel menu is incorrect. Corrective Action Change the Width setting configured in Pen no. of the Palette A or Palette B selected in the Control Panel menu. (See "Menu Settings.") ➔User's Guide ThickenFineLines in the Control Panel menu is set to Off. If fine lines are printed faintly, setting ThickenFineLines to On will print the lines more distinctly. (See "Menu Settings.") ➔User's Guide HP-GL/2 jobs are printed in monochrome (or color) Cause The Color Mode setting in the Control Panel menu is incorrect. Corrective Action Check the Color Mode setting in the Control Panel menu. (See "Menu Settings.") ➔User's Guide However, for optimal Printhead performance, the printer consumes trace amounts of color ink even when Monochrome is selected as Color Mode. Printed colors of lines are inaccurate during HP-GL/2 printing Cause AdjustFaintLines is On in the Control Panel menu. Corrective Action Setting AdjustFaintLines to Off in the Control Panel menu may help produce the expected results. However, lines in some colors may appear broken. HP-GL/2 problems 106 Basic Guide