Canton DM 50 Owners Manual - Page 36

English IR learning function The DM 50 can learn the infrared code of your TV remote control and therefore allows you to control the functions of the Soundbar and TV device via your remote control. You can allocate the instructions for the Soundbar to any key of the TV remote control. When choosing a key make sure that the instructions for the Soundbar do not conflict with the TV device. We recommend that you deactivate the internal loudspeaker of the TV device once the Soundbar is connected. 1 Hold the TV remote control in position 2 Switch the Soundbar on 3 Press and hold the "On/Standby" key of the Soundbar remote control for approx. 5 seconds 4 The display shows a flashing IRL 5 Press the chosen function on the Canton remote control e.g. "Volume +" 6 Now the display shows a flashing v 7 Within 20 seconds press the key you wish to allocate to this function on the TV remote control 8 Once this has been successfully allocated the display will show OK and you can continue with the programming of the next key function, e.g. "Volume -" 9 If the display shows FAI this means the allocation has failed and you should repeat steps 4 to 8 ON STANDBY MUTE TV remote control STEREO SURROUND BASS TREBLE Exit menu Press and hold the "On/Standby" key again for longer thaBnLUE5TOsOeTHconds to exit the "IR learning function" mPAeIRnINuG. If the Soundbar does not receive any input instructions from the remote control within a period of 60 seconds the menu navigation returns to normal mode automatically. 35