Carvin 1584 Instruction Manual - Page 2

Aps™ Power Amp Specs, Subwoofer Systems Specs, Way Systems Specs, Way Systems Specs, Pm15/pm15a

Page 2 highlights

2-WAY SYSTEMS SPECS: 805 Frequency Response: 85 Hz to 17 kHz ±3 dB Useable Low Frequency: 72 Hz (-10 dB) Power Handling: 200 watts Continuous Recommended Amp: up to 400 watts Sensitivity: 98 dB SPL, 1Watt @ 1meter Coverage Angles: 60° Horizontal, 60° Vertical Horn Driver Protection: Yes Nominal Impedance: 8Ω Biampable: No Connectors: Two 1/4" Woofer Enclosure Type: Vented Bass Reflex Construction: Poplar Plywood Dimensions: 12.75"W x 11.5"D x 18.5"H 32.4 x 29 x 47 cm Net Weight: 24 lbs. 9.8 Kgs Options: Cover: CV400 Stand: SS20 3-WAY SYSTEMS SPECS: 1584 Frequency Response: 50 Hz to 18 kHz ±3 dB Useable Low Frequency: 38 Hz (-10 dB) Power Handling: 400 watts Continuous Recommended Amp: up to 800 watts Sensitivity: 100 dB SPL, 1Watt @ 1meter Coverage Angles: 90° Horizontal, 45° Vertical Horn Driver Protection: Yes, relay protection Nominal Impedance: 8Ω Biampable: Yes Connectors: Two 1/4" & Two Speakon™ Woofer Enclosure Type: Vented Bass Reflex Construction: Poplar Plywood Dimensions: 22"W x 15.25"D x 31.5"H 55.8 x 38.7 x 80 cm Net Weight: 74 lbs. 29.4 Kgs Options: Cover: CVS1584 Stand: SS20 SUBWOOFER SYSTEMS SPECS: SW1801 Frequency Response: 40 Hz to 450 Hz ±3 dB Useable Low Frequency: 28 Hz (-10 dB) Power Handling: 800 watts Continuous Recommended Amp: up to 1600 watts Sensitivity: 95 dB SPL, 1Watt @ 1meter Nominal Impedance: 4Ω Connectors: Two 1/4" & Two Speakon™ Woofer Enclosure Type: Vented Bass Reflex Construction: Poplar Plywood Dimensions: 24.75"W x 24"D x 34"H 63 x 61 x 86 cm Net Weight: 93 lbs. 41.7 Kgs Options: Cover: CVS1230 Stand: SS20 1230 75Hz to 18kHz±3dB 55 Hz (-10 dB) 300 watts Continuous up to 600 watts 99 dB SPL, 1Watt @ 1meter 90° Horizontal, 45° Vertical Yes, relay protection 8Ω Yes Two 1/4" & Two Speakon™ Vented Bass Reflex Poplar Plywood 17.5"W x 12"D x 22"H 44.4 x 30.5 x 55.8 cm 36 lbs. 16.3 Kgs Cover: CV1230 Stand: SS20 1232 80Hz to 18kHz±3dB 61 Hz (-10 dB) 300 watts Continuous up to 600 watts 99 dB SPL, 1Watt @ 1meter 90° Horizontal, 45° Vertical Yes, relay protection 8Ω Yes Two 1/4" & Two Speakon™ Closed Box Poplar Plywood 18"W x 13"D x 22"H 45.7 x 33 x 55.8 cm 33 lbs. 15 Kgs Cover: CVS1232 1540 60Hz to 18kHz±3dB 49 Hz (-10 dB) 400 watts Continuous up to 800 watts 100 dB SPL, 1Watt @ 1meter 90° Horizontal, 45° Vertical Yes, relay protection 8Ω Yes Two 1/4" & Two Speakon™ Vented Bass Reflex Poplar Plywood 20"W x 14"D x 26"H 50.8 x 35.5 x 66 cm 51 lbs. 23 Kgs Cover: CVS1540 1542 65Hz to 18kHz±3dB 52 Hz (-10 dB) 400 watts Continuous up to 800 watts 101 dB SPL, 1Watt @ 1meter 90° Horizontal, 45° Vertical Yes, relay protection 8Ω Yes Two 1/4" & Two Speakon™ Closed Box Poplar Plywood 20"W x 14"D x 26"H 50.8 x 35.5 x 66 cm 46 lbs. 21 Kgs Cover: CVS1542 1562 54Hz to 19kHz±3dB 44 Hz (-10 dB) 600 watts Continuous up to 900 watts 102 dB SPL, 1Watt @ 1meter 90° Horizontal, 45° Vertical Yes, relay protection 4Ω Yes Two 1/4" & Two Speakon™ Vented Bass Reflex Poplar Plywood 17"W x 15.25"D x 44.25"H 43 x 38.7 x 112cm 82 lbs. 15 Kgs Cover: CV1562 1588 45Hz to 19kHz±3dB 34 Hz (-10 dB) 800 watts Continuous up to 1200 watts 103 dB SPL, 1Watt @ 1meter 90° Horizontal, 45° Vertical Yes, relay protection 4Ω Yes Two 1/4" & Two Speakon™ Vented Bass Reflex Poplar Plywood 25"W x 19.25"D x 48.5"H 63 x 49 x 123 cm 124 lbs. 51 Kgs Cover: CVS1588 SW1802 35Hz to 1 kHz±3dB 24 Hz (-10 dB) 1600 watts Continuous up to 3200 watts 97 dB SPL, 1Watt @ 1meter 4Ω Two 1/4" & Two Speakon™ Vented Bass Reflex Poplar Plywood 48"W x 24"D x 31"H 122 x 61 x 79 cm 159 lbs. 65.7 Kgs PM15/PM15A SPECS: Frequency Response: 60 Hz to 18 kHz ±3 dB Useable Low Frequency: 49 Hz (-10 dB) Power Handling: 400w continuous, 800 peak Recommended Amp: up to 800 watts Sensitivity: 100 dB SPL, 1 Watt @ 1 meter Coverage Angles: 90° Horizontal, 45° Vertical Horn Driver Protection: Yes Nominal Impedance: 8Ω Biampable: Yes Connectors: One 1/4", One Speakon™ Woofer Enclosure Type: Vented Construction: Acrylonitrile Butadiene Styrene (ABS) Dimensions: 17.5"W x 14"D x 27"H 44.5 x 35.6 x 68.6 cm Net Weight: 48 Lbs. Options: 21.8 Kgs Cover: CV15 APS™ POWER AMP SPECS: 1540A Frequency Response: 20 Hz to 20 kHz ±1 dB THD: Less than 0.1% @ 90% power Total Power : 350 watts RMS Low Frequency: 300 watts @ 8Ω Mid Frequency: N/A High Frequency: 50 watts @ 16Ω Sensitivity: 1.5VAC for full output-level set at "0" Equalization: High ±6dB @ 10 kHz Mid ±6dB, sweepable 100 Hz-5 kHz Low ±6dB @100 Hz Active Crossover Filters: 24dB / octave Linkwitz-Riley Input/Through: 1/4" balanced & XLR Imput Impedance: 22kΩ Common Mode Rejection: 72dB @ 1kHz Overload Protection: Yes Power Amp Design: Carvin DCM™ Technology AC Voltage, VA: 120 or 240 VAC models, 300 VA Idle VA: 20 VA AC Connection: 3 prong connector (grounded) AC Power Cable: 16 ga. (heavier for long runs) Weight: 55 lbs. 24.9 kg Options: Cover: CVS1540 Stand: SS20 1542A 20 Hz to 20 kHz ±1 dB Less than 0.1% @ 90% power 350 watts RMS 300 watts @ 8Ω N/A 50 watts @ 16Ω 1.5VAC for full output-level set at "0" High ±6dB @ 10 kHz Mid ±6dB, sweepable 100 Hz-5 kHz Low ±6dB @100 Hz 24dB / octave Linkwitz-Riley 1/4" balanced & XLR 22kΩ 72dB @ 1kHz Yes Carvin DCM™ Technology 120 or 240 VAC models, 300 VA 20 VA 3 prong connector (grounded) 16 ga. (heavier for long runs) 51 lbs. 23.1 kg Cover: CVS1542 1584A 20 Hz to 20 kHz ±1 dB Less than 0.1% @ 90% power 425 watts RMS 300 watts @ 8Ω 75 watts @ 16Ω 50 watts @ 16Ω 1.5VAC for full output-level set at "0" High ±6dB @ 10 kHz Mid ±6dB, sweepable 100 Hz-5 kHz Low ±6dB @ 100 Hz 24dB / octave Linkwitz-Riley 1/4" balanced & XLR 22kΩ 72dB @ 1kHz Yes Carvin DCM™ Technology 120 or 240 VAC models, 400 VA 20 VA 3 prong connector (grounded) 16 ga. (heavier for long runs) 81 lbs. 36.7 kg Cover: CVS1584 Stand: SS20 1588A 20 Hz to 20 kHz ±1 dB Less than 0.1% @ 90% power 900 watts RMS 700 watts @ 4Ω 120 watts @ 8Ω 80 watts @ 16Ω 1.5VAC for full output-level set at "0" High ±6dB @ 10 kHz Mid ±6dB, sweepable 100 Hz-5 kHz Low ±6dB @ 100 Hz 24dB / octave Linkwitz-Riley 1/4" balanced & XLR 22kΩ 72dB @ 1kHz Yes Carvin DCM™ Technology 120 or 240 VAC models, 900 VA 25 VA 3 prong connector (grounded) 16 ga. (heavier for long runs) 139 lbs. 63 kg Cover: CVS1588 SW1801A 20 Hz to 20 kHz ±1 dB Less than 0.1% @ 90% power 700 watts RMS 700 watts @ 4Ω N/A N/A 1.5VAC for full output-level set at "0" N/A N/A N/A 24dB / octave 80Hz, 120Hz, or bypass 1/4" balanced & XLR 22kΩ 72dB @ 1kHz Yes Carvin DCM™ Technology 120 or 240 VAC models, 900 VA 25 VA 3 prong connector (grounded) 16 ga. (heavier for long runs) 139 lbs. 63 kg Cover: CVS1801 The power generated by the APS internal power amps has the capacity to damage the drivers, in which case they would not be covered under warranty.

  • 1
  • 2
  • 3
  • 4

APS™ POWER AMP SPECS:
1540A
1542A
1584A
1588A
SW1801A
Frequency Response:
20 Hz to 20 kHz ±1 dB
20 Hz to 20 kHz ±1 dB
20 Hz to 20 kHz ±1 dB
20 Hz to 20 kHz ±1 dB
20 Hz to 20 kHz ±1 dB
THD:
Less than 0.1% @ 90% power
Less than 0.1% @ 90% power
Less than 0.1% @ 90% power
Less than 0.1% @ 90% power
Less than 0.1% @ 90% power
Total Power :
350 watts RMS
350 watts RMS
425 watts RMS
900 watts RMS
700 watts RMS
Low Frequency:
300 watts @ 8
300 watts @ 8
300 watts @ 8
700 watts @ 4
700 watts @ 4
Mid Frequency:
N/A
N/A
75 watts @ 16
120 watts @ 8
N/A
High Frequency:
50 watts @ 16
50 watts @ 16
50 watts @ 16
80 watts @ 16
N/A
Sensitivity:
1.5VAC for full output-level set at “0”
1.5VAC for full output-level set at “0”
1.5VAC for full output-level set at “0”
1.5VAC for full output-level set at “0”
1.5VAC for full output-level set at “0”
Equalization:
High
±6dB @ 10 kHz
High
±6dB @ 10 kHz
High
±6dB @ 10 kHz
High
±6dB @ 10 kHz
N/A
Mid ±6dB, sweepable 100 Hz-5 kHz
Mid ±6dB, sweepable 100 Hz-5 kHz
Mid ±6dB, sweepable 100 Hz-5 kHz
Mid ±6dB, sweepable 100 Hz-5 kHz
N/A
Low ±6dB @100 Hz
Low ±6dB @100 Hz
Low ±6dB @ 100 Hz
Low ±6dB @ 100 Hz
N/A
Active Crossover Filters:
24dB / octave Linkwitz-Riley
24dB / octave Linkwitz-Riley
24dB / octave Linkwitz-Riley
24dB / octave Linkwitz-Riley
24dB / octave 80Hz, 120Hz, or bypass
Input/Through:
1/4" balanced & XLR
1/4" balanced & XLR
1/4" balanced & XLR
1/4" balanced & XLR
1/4" balanced & XLR
Imput Impedance:
22k
22k
22k
22k
22k
Common Mode Rejection:
72dB @ 1kHz
72dB @ 1kHz
72dB @ 1kHz
72dB @ 1kHz
72dB @ 1kHz
Overload Protection:
Yes
Yes
Yes
Yes
Yes
Power Amp Design:
Carvin DCM™ Technology
Carvin DCM™ Technology
Carvin DCM™ Technology
Carvin DCM™ Technology
Carvin DCM™ Technology
AC Voltage, VA:
120 or 240 VAC models, 300 VA
120 or 240 VAC models, 300 VA
120 or 240 VAC models, 400 VA
120 or 240 VAC models, 900 VA
120 or 240 VAC models, 900 VA
Idle VA:
20 VA
20 VA
20 VA
25 VA
25 VA
AC Connection:
3 prong connector (grounded)
3 prong connector (grounded)
3 prong connector (grounded)
3 prong connector (grounded)
3 prong connector (grounded)
AC Power Cable:
16 ga. (heavier for long runs)
16 ga. (heavier for long runs)
16 ga. (heavier for long runs)
16 ga. (heavier for long runs)
16 ga. (heavier for long runs)
Weight:
55 lbs.
51 lbs.
81 lbs.
139 lbs.
139 lbs.
24.9 kg
23.1 kg
36.7 kg
63 kg
63 kg
Options:
Cover: CVS1540
Cover: CVS1542
Cover: CVS1584
Cover: CVS1588
Cover: CVS1801
Stand: SS20
Stand: SS20
SUBWOOFER SYSTEMS SPECS:
SW1801
SW1802
Frequency Response:
40 Hz to 450 Hz ±3 dB
35Hz to 1 kHz±3dB
Useable Low Frequency:
28 Hz (-10 dB)
24 Hz (-10 dB)
Power Handling:
800 watts Continuous
1600 watts Continuous
Recommended Amp:
up to 1600 watts
up to 3200 watts
Sensitivity:
95 dB SPL, 1Watt @ 1meter
97 dB SPL, 1Watt @ 1meter
Nominal Impedance:
4
4
Connectors:
Two 1/4" & Two Speakon™
Two 1/4" & Two Speakon™
Woofer Enclosure Type:
Vented Bass Reflex
Vented Bass Reflex
Construction:
Poplar Plywood
Poplar Plywood
Dimensions:
24.75"W x 24"D x 34"H
48"W x 24"D x 31"H
63 x 61 x 86 cm
122 x 61 x 79 cm
Net Weight:
93 lbs.
159 lbs.
41.7 Kgs
65.7 Kgs
Options:
Cover: CVS1230
Stand: SS20
2-WAY SYSTEMS SPECS:
805
1230
1232
1540
1542
1562
Frequency Response:
85 Hz to 17 kHz ±3 dB
75Hz to 18kHz±3dB
80Hz to 18kHz±3dB
60Hz to 18kHz±3dB
65Hz to 18kHz±3dB
54Hz to 19kHz±3dB
Useable Low Frequency:
72 Hz (-10 dB)
55 Hz (-10 dB)
61 Hz (-10 dB)
49 Hz (-10 dB)
52 Hz (-10 dB)
44 Hz (-10 dB)
Power Handling:
200 watts Continuous
300 watts Continuous
300 watts Continuous
400 watts Continuous
400 watts Continuous
600 watts Continuous
Recommended Amp:
up to 400 watts
up to 600 watts
up to 600 watts
up to 800 watts
up to 800 watts
up to 900 watts
Sensitivity:
98 dB SPL, 1Watt @ 1meter
99 dB SPL, 1Watt @ 1meter
99 dB SPL, 1Watt @ 1meter
100 dB SPL, 1Watt @ 1meter
101 dB SPL, 1Watt @ 1meter
102 dB SPL, 1Watt @ 1meter
Coverage Angles:
60° Horizontal, 60° Vertical
90° Horizontal, 45° Vertical
90° Horizontal, 45° Vertical
90° Horizontal, 45° Vertical
90° Horizontal, 45° Vertical
90° Horizontal, 45° Vertical
Horn Driver Protection:
Yes
Yes, relay protection
Yes, relay protection
Yes, relay protection
Yes, relay protection
Yes, relay protection
Nominal Impedance:
8
8
8
8
8
4
Biampable:
No
Yes
Yes
Yes
Yes
Yes
Connectors:
Two 1/4"
Two 1/4" & Two Speakon™
Two 1/4" & Two Speakon™
Two 1/4" & Two Speakon™
Two 1/4" & Two Speakon™
Two 1/4" & Two Speakon™
Woofer Enclosure Type:
Vented Bass Reflex
Vented Bass Reflex
Closed Box
Vented Bass Reflex
Closed Box
Vented Bass Reflex
Construction:
Poplar Plywood
Poplar Plywood
Poplar Plywood
Poplar Plywood
Poplar Plywood
Poplar Plywood
Dimensions:
12.75"W x 11.5"D x 18.5"H
17.5"W x 12"D x 22"H
18"W x 13"D x 22"H
20"W x 14"D x 26"H
20"W x 14"D x 26"H
17"W x 15.25"D x 44.25"H
32.4 x 29 x 47 cm
44.4 x 30.5 x 55.8 cm
45.7 x 33 x 55.8 cm
50.8 x 35.5 x 66 cm
50.8 x 35.5 x 66 cm
43 x 38.7 x 112cm
Net Weight:
24 lbs.
36 lbs.
33 lbs.
51 lbs.
46 lbs.
82 lbs.
9.8 Kgs
16.3 Kgs
15 Kgs
23 Kgs
21 Kgs
15 Kgs
Options:
Cover: CV400
Cover: CV1230
Cover: CVS1232
Cover: CVS1540
Cover: CVS1542
Cover: CV1562
Stand: SS20
Stand: SS20
3-WAY SYSTEMS SPECS:
1584
1588
Frequency Response:
50 Hz to 18 kHz ±3 dB
45Hz to 19kHz±3dB
Useable Low Frequency:
38 Hz (-10 dB)
34 Hz (-10 dB)
Power Handling:
400 watts Continuous
800 watts Continuous
Recommended Amp:
up to 800 watts
up to 1200 watts
Sensitivity:
100 dB SPL, 1Watt @ 1meter
103 dB SPL, 1Watt @ 1meter
Coverage Angles:
90° Horizontal, 45° Vertical
90° Horizontal, 45° Vertical
Horn Driver Protection:
Yes, relay protection
Yes, relay protection
Nominal Impedance:
8
4
Biampable:
Yes
Yes
Connectors:
Two 1/4" & Two Speakon™
Two 1/4" & Two Speakon™
Woofer Enclosure Type:
Vented Bass Reflex
Vented Bass Reflex
Construction:
Poplar Plywood
Poplar Plywood
Dimensions:
22"W x 15.25"D x 31.5”H
25"W x 19.25"D x 48.5”H
55.8 x 38.7 x 80 cm
63 x 49 x 123 cm
Net Weight:
74 lbs.
124 lbs.
29.4 Kgs
51 Kgs
Options:
Cover: CVS1584
Cover: CVS1588
Stand: SS20
60 Hz to 18 kHz ±3 dB
49 Hz (-10 dB)
400w continuous, 800 peak
up to 800 watts
100 dB SPL, 1 Watt @ 1 meter
90° Horizontal, 45° Vertical
Yes
8
Yes
One 1/4", One Speakon™
Vented
Acrylonitrile Butadiene Styrene (ABS)
17.5"W x 14"D x 27"H
44.5 x 35.6 x 68.6 cm
48 Lbs.
21.8 Kgs
Cover: CV15
PM15/PM15A SPECS:
The power generated by the APS internal power amps has the capacity to damage the drivers, in which case they would not be covered under warranty.
Frequency Response:
Useable Low Frequency:
Power Handling:
Recommended Amp:
Sensitivity:
Coverage Angles:
Horn Driver Protection:
Nominal Impedance:
Biampable:
Connectors:
Woofer Enclosure Type:
Construction:
Dimensions:
Net Weight:
Options: