Carvin EM900 Instruction Manual - Page 2

Introduction, Em900 / Em901 Specifications, Em902 Ear Bud Specifications, System Includes, Key - manual

Page 2 highlights

CARVIN ENGINEERING DATA EM900 IN EAR MONITOR SYSTEM INTRODUCTION EM900 / EM901 SPECIFICATIONS Thank you for purchasing the Carvin Audio EM900 In Ear Monitor System. The features and sound will give you a new level of monitoring quality that you have never experienced before. The following information found in this manual will help you get the most enjoyment and functionality from your new EM900. IMPORTANT PRECAUTIONS »» Make all connections before AC power is connected »» Operating RF Frequency: 518-542MHz »» Frequency Response : 30Hz-15kHz »» S/N ratio : 80dB (A weighted) »» Image frequency rejection : 80dB »» Channel separation : 35dB »» Input level switch : 0dB / -10dB »» AC Mains input : 100V-240V (50-60Hz) »» Receiver power : 2AA batteries »» Avoid exposure to high temperature or humidity »» Do not handle the transmitter or AC cord in wet conditions »» Keep away from heat and flame »» Avoid prolonged listening at high levels. Refer to the OSHA table on page 7. »» Battery life : 8 hours »» Net Weight : Base 3.2lbs Receiver .45lbs »» Dimensions : Base (EM900) 8.35"W x 9"D x 1.75"H »» Dimensions : Receiver (EM901) 4.5"H x 2.75"W x 1"D EM902 EAR BUD SPECIFICATIONS »» Frequency Response : 20Hz-20kHz KEY FEATURES »» UHF Operation with PLL technology provides a reliable signal connection »» 960 selectable channels with Hi Frequency boost option »» Type : Dynamic »» Impedance : 16 ohms »» Sensitivity @ 1kHz : 114dB/mW »» Distortion : less than 0.3% »» 4 channel groups with 16 presets allow for quick setup »» Built in audio limiter to control peak signals »» Receiver features XLR and 1/4-inch inputs »» Lockout mode prevents accidental adjustments »» Cord length : 58" Inches SYSTEM INCLUDES : »» 1 EM900 Base Transmitter with antenna »» 1 EM901 Body Pack Receiver »» 1 Pair of EM902 High Definition Ear Buds »» Stereo or mono operation with volume and balance controls WARRANTY This CARVIN AUDIO product is guaranteed in normal use to be free from electrical and mechanical defects for a period of ninety days from date of purchase. Retain proof of purchase. This warranty is in lieu of any and all other guarantees or warranties, expressed or implied. There shall be no recovery for any consequential or incidental damages. PG. 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

CARVIN ENGINEERING DATA
EM900
IN EAR MONITOR SYSTEM
PG.
2
WARRANTY
This CARVIN AUDIO product is guaranteed in normal use to be free from electrical and mechanical defects for a
period of ninety days from date of purchase. Retain proof of purchase. This warranty is in lieu of any and all other
guarantees or warranties, expressed or implied. There shall be no recovery for any consequential or incidental
damages.
INTRODUCTION
Thank you for purchasing the Carvin
Audio EM900 In Ear Monitor System.
The features and sound will give you
a new level of monitoring quality that
you have never experienced before.
The following information found in
this manual will help you get the
most enjoyment and functionality
from your new EM900.
EM900 / EM901 SPECIFICATIONS
»
Operating RF Frequency: 518-542MHz
»
Frequency Response : 30Hz-15kHz
»
S/N ratio : 80dB (A weighted)
»
Image frequency rejection : 80dB
»
Channel separation : 35dB
»
Input level switch : 0dB / -10dB
»
AC Mains input : 100V-240V (50-60Hz)
»
Receiver power : 2AA batteries
»
Battery life : 8 hours
»
Net Weight : Base
3.2lbs Receiver .45lbs
»
Dimensions : Base (EM900) 8.35”W x 9”D x 1.75”H
»
Dimensions : Receiver (EM901) 4.5”H x 2.75”W x 1”D
EM902 EAR BUD SPECIFICATIONS
»
Frequency Response : 20Hz-20kHz
»
Type : Dynamic
»
Impedance : 16 ohms
»
Sensitivity @ 1kHz : 114dB/mW
»
Distortion : less than 0.3%
»
Cord length : 58” Inches
SYSTEM INCLUDES :
»
1 EM900 Base Transmitter with antenna
»
1 EM901 Body Pack Receiver
»
1 Pair of EM902 High Definition Ear Buds
KEY FEATURES
»
UHF Operation with PLL technology
provides a reliable signal connection
»
960 selectable channels with Hi
Frequency boost option
»
4 channel groups with 16 presets
allow for quick setup
»
Built in audio limiter to control peak
signals
»
Receiver features XLR and 1/4-inch
inputs
»
Lockout mode prevents accidental
adjustments
»
Stereo or mono operation with
volume and balance controls
IMPORTANT PRECAUTIONS
»
Make all connections before AC
power is connected
»
Avoid exposure to high temperature
or humidity
»
Do not handle the transmitter or AC
cord in wet conditions
»
Keep away from heat and flame
»
Avoid prolonged listening at high
levels. Refer to the OSHA table on
page 7.