Carvin EM900 Instruction Manual - Page 6

CARVIN ENGINEERING DATA SET UP IN EAR MONITOR SYSTEM STEREO OR MONO/MIX SETTING Select whether the EM901 operates in Stereo or Mono mode. In Mono mode one or both inputs on the EM900 transmitter can be used. In the case of using two inputs, the balance mix of the 2 inputs are adjusted by using the balance control knob #15 on the belt pack. »» 1. Hold down the SET button (#19) until the MENU list is visible. Press the (-) button (#20) to select "Stereo/Mono". Press the SET button again. Use the (+) and (-) buttons to select the desired mode. »» 2. Press SET to store and return to the MENU. »» 3. Press the (-) button to scroll down to "exit" and press the SET button. The EM901 is now ready for operation. HIGH FREQUENCY BOOST SETTING The Hi Freq. Boost raises treble output in the mix. If the sound becomes distorted at high volumes, turn this feature OFF, or reduce the levels. LCD DISPLAY CONTRAST Adjust the contrast of the EM901 display using the CONTRAST feature. »» 1 »» 2. »» 3. Hold down the SET button (#19) until the MENU list is visible. Press the (-) button (#20) to select "Contrast". Press the SET button again. Use the (+) and (-) buttons to adjust desired contrast. Press SET to store and return to the MENU. Press the (-) button to scroll down to "exit" and press the SET button. The EM901 is now ready for operation. DISPLAY BACKLIGHT To conserve battery life, the display backlight can be shut off at various time settings ranging from always on, 30 , 20 , 10 , 5 , 2 , 1 seconds and always off. Keeping the backlight ON will greatly reduce the battery life. »» 1. Hold down the SET button (#19) until the MENU list is visible. Press the (-) button (#20) to select "Hi-Freq Boost". Press the SET button again. Use the (+) and (-) buttons to select ON or OFF. »» 2. Press SET to store and return to the MENU. »» 3. Press the (-) button to scroll down to "exit" and press the SET button. The EM901 is now ready for operation. LIMITER The dynamic limiter reduces volume peaks to help protect your hearing and increase your listening experience. »» 1. Hold down the SET button (#19) until the MENU list is visible. Press the (-) button (#20) to select "Limiter". Press the SET button again. Use the (+) and (-) buttons to select ON or OFF. »» 1 »» 2. »» 3. Hold down the SET button (#19) until the MENU list is visible. Press the (-) button (#20) to select "Light Time". Press the SET button again. Use the (+) and (-) buttons to adjust desired backlight time. Press SET to store and return to the MENU. Press the (-) button to scroll down to "exit" and press the SET button. The EM901 is now ready for operation. EM902 EAR BUDS The EM902 ear buds are designed to give you an unparalleled listening experience. Proper care and use will extend the life of the ear buds and maximize your user experience. »» 1. Plug the EM902 earphones into the headphone jack (#16) on the receiver. Attach a pair silicone sleeves to the ends of the earphones. »» 2. Press SET to store and return to the MENU. »» 2. »» 3. Press the (-) button to scroll down to "exit" and press the SET button. The EM901 is now ready for operation. KEY LOCK The key lock feature prevents accidental changes to the EM901 receiver during use. »» 1. Hold down the SET button (#19) until the MENU list is visible. Press the (-) button (#20) to select "Key-Lock". Press the SET button again. Use the (+) button to select ON. Press the SET button again. The Key Lock is now engaged as indicated by the key icon. Follow the "L" and "R" markings on the earphones for left and right ear. Place the end of the earphone at the end of the ear canal and set the body of the earphone so your outer ear will hold it in place. The earphones should be worn with the wire hanging over the top of the ear. »» 2. To unlock, Press SET and then the (+) key. PG. 6 EM902 EAR BUDS