Carvin TRX3210A TRx3210 brochure - Page 2

TRx3210 Duratex™ coating SureFly™ hardware Recessed handle 10" Mid/Low Freq. drivers Integrated pin storage Maple hardwood PurePath™ horn lens TRx3210 Versatility and Clarity Introducing the 3-way TRx3210 compact line array/curve linear array element. The cabinet design allows easy stacking of up to 6 boxes on the ground, or up to four boxes on a TRx subwoofer. The integrated dual pole mounts allows 2 boxes to be safely supported over 1 subwoofer or use just 1 box for front fill at the edge of the stage. With the easy bolt on SureFly™ pin rigging system and SureFly™ T-bar, up to 12 boxes can be flown and adjusted to a "J" curve or spiral curve to fit any venue. The TRx3210's highly flexible design covers small to very large performances. The dual 10-inch, 3-way TRx3210 line array element is a full range system featuring two high-power transducers for the lo-end & mid-range, which provide very high coherence and definition. The high frequency section features two 1-inch exit, 1.75inch voice coil, Mylar diaphragm compression drivers mounted to a PurePath™ lens system. The PurePath™ horn lens is CNC machined from acoustically non-resonant Eastern Maple hardwood, providing a smooth equal path length wave guide, for pure natural cylindrically projected highs. The lens also places the horn drivers in time with the 10-inch drivers for the best phase alignment and transient response over the full frequency spectrum. 3-way Low, Low / Mid, High The 3-way design, with the operating frequency range divided into the low frequency band (80 Hz - 600 Hz), lo/mid band (80 Hz - 1500 Hz) and the very-high frequency band (1.5 kHz - 18.5 kHz), offers high 131 dB SPL levels yielding perfect intelligibility. Directivity The PurePath™ horn produces a tight 10 degree vertical x 100 degree horizontal pattern on a single cabinet. Conventional enclosures drop 6dB when doubling the distance. When coupled in a line array this pattern narrows further to produce the line array effect, which drops only 3dB when doubling the distance. This effect is also present with the tight coupling of the 10-inch drivers in an 11.8-inch vertical box. Over a point source single or multi cabinet array this is twice the SPL in an equivalent distance. The line array behavior is frequency dependent and varies with the number of cabinets in the array, so you can adjust the number of elements for the venue as needed. When the straight line of the line array is broken as in the case of a "J" curve, the elements behave more as a point source producing less output to the closer listeners. The TRx3210 can be deployed in a full curvilinear array at 10 degrees of angle between elements. This reduces the distance throw of the array and produces a smooth point source array covering 60 degrees of vertical and 100 degrees of horizontal coverage in six boxes. REAR CONNECTION PLATE The crossover features a Full Range/Biamp switch and a Pin Flip switch with pins 1+ 1or pins 2+ 2-. In full-range mode, run up to 4 TRX3210 on a single 4-pin Speakon™ cable. Maple hardwood PurePath™ horn lens - Front view and cutaway view