Carvin TRX3210A TRx3210 brochure - Page 3

Compact The TRx3210 are remarkably compact to make more room on the stage, plus they fit into containers for easy transport. For fast setups, the enclosures are stackable on the integrated foot receptors featured on the TRx subwoofers using no hardware. The inherent advantage of a line array design allows the rear audience to hear nearly the same levels as the front, which eliminates over powering the front. Features • High 140dB SPL (with 8 elements) • Extremely low distortion • Eastern Maple hardwood PurePath™ horn lens • Passive crossover with pins 1+ 1- or pins 2+ 2- flip switch • Bi-amp / full range switch • DuraTec™ weather & UV resistant tour-tough finish • 15mm Russian Baltic Birch 13-ply hardwood cabinet • Fly up to 12 enclosures with optional SureFly™ rigging • Stackable up to 6 enclosures - no hardware required • Dim: 23.6w x 11.8"h x14.8"d, 50 lbs • Made in the USA Curve Linear Array Configuration TRx3210 front fill Size ideal for truck pack The TRx3210 can be dual pole mounted, stacked on the ground or on top of a TRx subwoofer with aligning foot cups to secure stacked cabinets. SureFly™ hardware not require for stacking. The TRx3210 is also designed to serve as a curve linear array shown at 12.5 degrees. Total system coverage at 100 x 50 degrees. mount on TRx2118" or TRx2121" sub Stack up to 4 enclosures. 2 subwoofers per 4 enclosures minimum