Casio EX-Z16BK User Manual - Page 137
battery from the, Load the camera's battery and recon the time and date
View all Casio EX-Z16BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Problem Possible Cause and Recommended Action Language selection screen appears when the camera is turned on. 1)You did not configure initial settings after purchasing the camera or the camera may have been left with a dead battery. Check the camera setup (pages 20, 112). 2)There may be a problem with the camera's memory data. If this is the case, perform the reset operation to initialize the camera's setup (page 116). After that, configure each setting. If the language selection screen does not re-appear when you turn the camera on, it means that the camera's memory management data has been restored. If the same message appears after you turn power back on, contact your retailer or a CASIO authorized service center. I configured the date and time settings after purchasing the camera, but they become incorrect after I remove the battery from the camera. Load the camera's battery and reconfigure the time and date settings (page 20). Do not remove the battery from the camera for at least 24 hours after configuring time and date settings. After that, the settings will not be reset if you remove the battery. • If you leave the battery loaded for more than 24 hours after setting the date and time, and they still become incorrect after you remove the battery, it could mean that the camera's setting memory is defective. Contact your retailer or a CASIO authorized service center. 137 Appendix