Casio EX-Z2000 Owners Manual - Page 132
the camera to connect, cable that comes
View all Casio EX-Z2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
4. Turn off the camera and then use the USB USB port USB cable cable that comes with the camera to connect it to your Macintosh. Large connector • The camera does not draw power over the USB cable. Make sure the camera's battery is sufficiently charged before connecting. Small connector • Make sure that you insert the cable connector into the USB/ USB/AV port AV port until you feel it click securely into place. Failure to insert the connector fully can Making sure that the 6 mark on the camera is aligned with the 4 mark of the USB cable connector, connect the cable to the camera. result in poor communication or malfunction. • Note that even while the connector is fully inserted, you still will be able to see the metal part of the connector as shown in the illustration. • When connecting the USB cable to a USB port, make sure you align the connector correctly with the port. • Your computer may not be able to recognize the camera if you connect via a USB hub. Always connect directly to the computer's USB port. 5. Turn on the camera. The camera's back lamp will light green at this time. In this mode, your Macintosh recognizes the memory card loaded in the camera (or the camera's built-in memory if it does not have a memory card loaded) as a drive. The appearance of the drive icon depends on the Mac OS version you are using. 6. Double-click the camera's drive icon. 7. Drag the "DCIM" folder to the folder to which you want to copy it. 132 Using the Camera with a Computer