Casio KP-C10 User Guide - Page 62
Print quality is poor., Printing stops part way through.
![]() |
UPC - 079767134297
View all Casio KP-C10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Print quality is poor. EZ-LABEL PRINTER tape printer Thermal roll paper printer • Are you using a proper print density setting? Change the print density setting. See "To configure Label Software properties" on page 43. • Is the tape cartridge or thermal roll paper loaded correctly? Correctly load the tape cartridge or thermal roll paper. See the Label Printer's user's guide for details. • Is the printer head or rubber roller inside the printer dirty? Clean the printer head and rubber roller. See the Label Printer's user's guide for details. Ink ribbon is coming out of the tape outlet together with the tape. EZ-LABEL PRINTER tape printer Thermal roll paper printer • Was the ink ribbon slack when you loaded the tape cartridge? Remove the tape cartridge and make sure the ink ribbon is not broken. Correctly load the tape cartridge. See the Label Printer's user's guide for details. - Important! • Make sure you take up any slack in the ink ribbon before loading the tape cartridge into the Label Printer. • If the ink ribbon ever breaks, replace the tape cartridge with a new one. Printing stops part way through. EZ-LABEL PRINTER tape printer Thermal roll paper printer • Is the printer head overheated? The printer head heats up during printing. If you print a large number of consecutive labels or print labels that contain a large amount of black areas, the printer head can overheat, which causes printing to stop automatically. Simply leave the printer alone and the printing will resume when the print head cools down. 62
![](/manual_guide/products/casio-kpc10-user-guide-d9b7c99/62.png)