Casio PX 100 User Guide - Page 9

Playing with Different Tones Layering Two Tones Use the following procedure to layer to two tones, so they sound at the same time. 1 Simultaneously press the TONE buttons of the two tones that you want to layer. Example: Press GRAND PIANO 2 button and STRINGS button at the same time. Assigning Different Tones to the Left and Right Sides of the Keyboard You can assign different tones to keys on the left side and the right side of the keyboard. Split Point STRINGS GRAND PIANO 2 GRAND PIANO 2 STRINGS • The tones are now layered. 2 After you are finished using the layered tones, press the one of the TONE buttons again to unlayer them. Adjusting the Volume of Layered Tones 1 While holding down the CONTROL button, use the keyboard keys shown below to adjust the volume of the layered tones. - + 1 Press the TONE button of the tone you want to select for the high (right) range. Example: GRAND PIANO 2 2 Press the SPLIT button. • This causes the SPLIT indicator lamp to light. 3 Press the TONE button of the tone you want to select for the low (left) range. • The keyboard is now split between the two tones. Example: STRINGS 4 After you are finished using the split keyboard, press the SPLIT button again to unsplit it. • This causes the SPLIT indicator lamp to go out. NOTE You can also perform a kind of "quick split" operation using the following key operations. • Press the SPLIT button. ➠ Acoustic Bass (built-in tone) • Hold down the CONTROL button and press the SPLIT button. ➠ Ride Aco Bass (built-in tone) L L L L L L L L C1 C2 C3 C4 C5 C6 C7 C8 + : Raises the volume - : Lowers the volume 412A-E-009A E-7