Casio SF-4985ER User Guide - Page 101

Setting Up for Data Communications To set up the SF Unit to receive data 1. While an initial screen is displayed, press FUNC twice to display the second function menu. • You can perform the above operation while the initial screen of the Telephone Directory, Memo Mode, Schedule Keeper, To Do Mode, Calendar or Reminder is displayed. • In the Expense Mode, you should press FUNC three times. • If you want the received data to be stored in the secret memory area, you should also enter the secret memory area at this point. If you are in the open memory area on the receiving unit, received data is stored into the open memory area. 2. Press 4 to select DATA COMM. 3. Press 2 to select RECEIVE. • This message indicates that the receive unit is standing by for data. Perform the required procedures to start sending data from another SF Unit, a CSF Unit, an NX Unit (see manual for details) or a personal computer (see the Interface Unit manual for details). • To abort the receive operation at any time, press ESC. • This procedure is the same regardless of whether the data is received from another SF Unit, a CSF Unit, an NX Unit or from a personal computer. 4. The display changes to the following once the SF Unit starts receiving data. Receive data item count • The number of data items received is counted on the display. • If an error occurs during the receive operation, the message "TRANSMIT ERROR!" appears on the display. Press ESC to clear the error message. • Received data is added to the data already stored in memory. If the memory becomes full during the receive operation, the message "MEMORY FULL!" appears and data transfer stops. Press ESC to clear the error message. 99