Casio XJ-A256 User Guide - Page 46
Indicator/Error Message, Description and Required Action, If this message reappears
View all Casio XJ-A256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Indicator/Error Message Description and Required Action POWER LIGHT TEMP Message : Green steady :- :- : A system problem has occurred. Normal projection is not possible. A system problem has occurred, which may cause problems with some functions. Turn off the projector, disconnect the power cord from the projector and wait for all of the projector's indicators to go out. Next, reconnect the power cord and turn the projector back on. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. Press the [ESC] key to clear the warning message. POWER : Green steady LIGHT : - TEMP : - Message : There is some problem with the system. The audio function may not operate correctly. POWER : Green steady LIGHT : - TEMP : - Message : There is a problem with the USB port. The USB connection was terminated because of a problem with the USB port. To use the USB function, turn off the projector and then turn it back on again. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. Press the [ESC] key to clear the warning message. POWER LIGHT TEMP Message : Green steady :- :- : Zoom and focus cannot be performed for some reason. Try turning the projector off and then back on again. If this message reappears, request servicing. Zoom and focus cannot be performed due to some trouble in the optical drive circuit. Turn off the projector and then turn it back on again. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. Press the [ESC] key to clear the warning message. POWER : Amber flashing J Red steady LIGHT : - TEMP : Red steady Message : - The projector was turned off automatically due to some problem that was probably caused by external digital noise or some other reason. Confirm that the POWER/STANDBY indicator is lit red (without flashing). After checking the POWER/STANDBY indicator, disconnect the power cord from the projector and wait for all of the projector's indicators to go out. Next, reconnect the power cord and turn projector power back on. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. POWER LIGHT TEMP : Amber flashing J Red steady : Red flashing (0.5-second interval) : Red flashing (0.5-second interval) The projector was turned off automatically because the light source unit turned off or did not turn on. After confirming that the POWER/STANDBY indicator is lit red (without flashing), unplug the power cord. Wait for a short while and then plug it back in and turn on the projector again. If the error occurs again when you turn power back on, contact your retailer or nearest authorized CASIO Service Center. Message : - 46