Casio XJ-M140 Setup Guide - Page 20

Troubleshooting Check the following items whenever you experience any problem with the projector. Problem Power does not turn on. No image is projected or the projected image is abnormal. Image color or display is very abnormal. I can't understand messages or menus because they are the wrong language. No sound Cause and Recommended Action z If the POWER/STANDBY indicator is not lit, the AC power cord is not connected correctly. Connect the AC power cord correctly. z If the TEMP or LIGHT indicator remains flashing or lit, it means some type of error has occurred. See "Error Indicators and Warning Messages" in the User's Guide (UsersGuide_English.pdf). z The computer or video device connected to the projector is not turned on or it is not outputting a video signal. Make sure the connected computer or video device is turned on, and perform the required operation on it to output a video signal. z The correct output source is not selected on the projector. On the projector, select the correct input source that corresponds to the connected device. z Images may not project correctly when you have the component output terminal of a video device connected to the COMPUTER IN terminal of the projector. Connect to the VIDEO terminal or S-VIDEO terminal of the projector. The wrong option ("Component" or "RGB") may be selected for the "Input Settings J COMPUTER Terminal" setting on the setup menu. The image will not be projected correctly if "Component" is selected while the projector's COMPUTER IN terminal is connected to the RGB output terminal of a computer, or if "RGB" is selected while the projector's COMPUTER IN terminal is connected to the component video output terminal of a video device. On the setup menu, select "Auto" for the "Input Settings J COMPUTER Terminal" setting. See the User's Guide (UsersGuide_English.pdf). Perform the following operation to select the language you want. See the User's Guide (UsersGuide_English.pdf). 1. Press the [MENU] key to display the setup menu. 2. If the input signal is HDMI, press [T] four times and then press the [ENTER] key. If the input signal is not HDMI, press [T] five times and then press the [ENTER] key. 3. Press [S] twice and then press the [ENTER] key to display the language selection menu. 4. Use the [T] and [S] keys to move the highlighting to the language you want to select and then press the [ENTER] key. 5. Press the [MENU] key to exit the setup menu. z The projector's volume level setting may be too low or muted. Press the remote controller [VOLUME] key and then use [T] and [S] to adjust the volume level. See the User's Guide (UsersGuide_English.pdf). z The volume level setting of the device connected to the projector is too low or the other device is not outputting audio. Adjust the volume level of the connected device. z The audio output of the connected device may not be connected correctly to the projector's AUDIO IN terminal or AUDIO IN L/R terminal. Check the connection, referring to one of the following (depending on the type of connected device): "Connecting a Computer to the Projector" in this manual or "Connecting to a Video Device" in the User's Guide (UsersGuide_English.pdf) z "Line" is selected for the setup menu "Option Settings 2 J Audio Out" setting. Change the "Audio Out" setting to "Speaker". See the User's Guide (UsersGuide_English.pdf). B E-18