Celestron MICRODIRECT 1080P HDMI HANDHELD DIGITAL MICROSCOPE MicroDirect 1080p - Page 5
Using Your Microscope
View all Celestron MICRODIRECT 1080P HDMI HANDHELD DIGITAL MICROSCOPE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
3. USING YOUR MICROSCOPE A. CONNECT TO A MONITOR OR PROJECTOR + Connect the included HDMI cable to the microscope and to an open HDMI port on the monitor or projector. + Plug the USB cable into the microscope and then into an open USB 2.0 port on your monitor or projector (if available). + If there is no USB 2.0 port on the monitor or projector, use any 5V-1A USB plug and plug the USB cable into it, and then into an available power outlet. NOTE: T he included USB cable works with all standard USB plugs that come with many of today's electronics such as smartphones and tablets. NOTE: An additional option for power is an external power source such as a power bank that has a standard USB OUT port. All Celestron Elements hand warmers and power banks will work for this purpose. You can find them here: www.celestronelements.com + Power up the microscope by pressing the ON/OFF button (5). B. TAKE A STILL IMAGE A + Insert your Micro-SD card in the Micro SD card slot (3) on the MicroDirect body. NOTE: Micro SD Card NOT included. NOTE: SD Card slot supports up to 32G SDHC. B + Loosen the Lock Wheel (15) adjust the course focus by rotating the Course Focus wheel (16). + Tighten the Lock wheel (15) to hold the assembly in place. + Turn the Fine Focus wheel (11) to focus on the specimen. C + Press the Shutter Trigger button (8) and the captured image will be saved in the Micro-SD card. ENGLISH I 5